Maestro / Arcas Compressor Sustainer Pedal

The Maestro Arcas Compressor Sustainer pedal is designed to be versatile, ranging from light, clear compression sounds to heavy, tight compression.

With ample sustain and level compensation, this is one pedal that can be used in all situations.
This analogue pedal features a two-mode toggle switch for greater sonic versatility.
The LO mode offers low picking sensitivity and the HI mode offers high picking sensitivity.
The layout of the three controls allows you to quickly adjust the amount of gain compensation and overall output volume with Sustain (amount of compression gain), Attack (speed of compression effect) and Level.
When the True Bypass footswitch is switched on, a bugle LED light above the Maestro logo illuminates so you can check the active status of the effects pedal at any time.

■ Specifications.
Switches: True Bypass footswitch, HI/LO Mode toggle switch
Led Indicators: red, yellow and blue bugle lights above the Maestro logo when the pedal is active
Signal Processing: All analogue.
Power Requirements: 9V battery or 9VDC power supply (5.5 x 2.1mm plug, centre negative wiring)
Current Draw: 21.9 mA
Power On Switch: built into the input jack; for 9V battery operation, unplug when not in use to prevent battery drain.
If the unit is to be stored for an extended period of time, remove the battery to prevent leakage or damage to the battery.
Input Impedance: 310 kΩ
Output Impedance: 470 Ω
Switching Type: True Bypass
Dimensions: (D x W x H) 5.04" x 3.45" x 2.5" (12.8cm x 8.76cm x 6.35c) including feet, knobs and jacks
Weight: 1.20 lb. (544.8g)