Revv Amplification / Generator 120 MKIII

The Generator 120 MKIII is a 4-channel guitar amp head with a reactive load and cabinet simulator for stereo direct output.

Rev Amplification, a high-end amp and effect brand from Canada, has released the Generator 120MK3, an all-tube guitar amp head that can be used for a wide range of purposes, from large-scale stages to home practice and desktop recording, with an output switch of 120W/10W, and allows for a wide range of sound making.
The Generator 120 MK3 has four channels (clean, crunch, and two types of high-gain distortion), and each channel has three tone controls (bass, middle, and treble), allowing you to set a wide range of tone characters to suit your songs.
In addition, Channel 1 (clean channel) is equipped with a wide mode that expands the range, Channel 2 (crunch channel) is equipped with a drive mode, and Channel 3 (purple channel) and Channel 4 (red channel) are each equipped with an aggression mode, allowing you to switch between several types of tones within the same channel (CH1 has two types, CH2, CH3, and CH4 have three types).
It also has two master volume, presence and depth controls, a reverb switch, a noise gate, and more.
The rear panel also has an effects loop and MIDI terminals.
It is a traditional all-tube guitar amp that uses five ECC83 preamp tubes and four 6L6GC power tubes, but it also has the expandability to support digital recording.

You can connect it to your favorite external speaker cabinet like a normal amp, or you can use the balanced XLR output terminal to output directly to a mixer or interface without using the speaker output.
The output from the balanced XLR allows you to use the Two notes Torpedo virtual cabinet, which is very convenient for DTM.
If you connect it to a PC or mobile device via USB or Bluetooth, you can use Two notes' Torpedo Remote (Wireless Remote) software, which allows you to control EQ, select reverb space, and create precise sounds using cabinet simulators and microphone simulators.
Furthermore, by using the software and MIDI terminals to set up, you can use your MIDI controller to increase user settings such as virtual cabinets, channel select, and aggression switching, and to perform practical program changes to suit your preferences.

A dedicated foot switch is included that can be used to switch channels (and modes), turn the effect loop on/off, and switch master volume 1/2 (and mute and save presets).

■Output (Peak): 186W@4Ω, 185W@8Ω, 192W@16Ω,
16.3W@4Ω, 16.4W@8Ω, 16.8W@16Ω
■Output (RMS): 120W@4Ω, 10W@4Ω
■Vacuum tubes used: ECC83 (12AX7) × 5, 6L6GC × 4
■Controls: [Front Panel] Channel Select Switch (CH1/Wide, CH2/Drive, CH3/Aggression, CH4/Aggression), Store Switch, Bright Switch (for CH1&2), Bright Switch (for CH3&CH4),
CutSwitch, Fat Switch, Reverb Switch, Gate Switch, Pre/PostSwitch, Level Control, Master1 Control, Master2 Control,Presence Control, Depth Control, Virtual Cab Select Switch,ON/Standby Switch, ON/OFF Switch,
Treble, Middle, Bass, Level,
Gain, Treble, Middle, Bass, Level,
Gain, Treble, Middle, Bass, Level,
Gain, Treble, Middle, Bass, Level, [Rear Panel] Ground/LiftSwitch, Reverb Level Control, Gate Threshold Control, USB,120W/10W Switch, Internal Load/Speaker Switch
■Input/output terminals: [Front Panel] Input, Headphone Out [Rear Panel]
Power Input, Balanced Outputs(Left, Right), FX Loop
(Send/Return), Cabinet Lighting, Foot Switch, MIDI Through,
MIDI In, Speaker Outputs (4Ω×2, 8Ω×2, 16Ω×1)
■Compatible power supply: 100VAC, 50/60Hz
■Size: H270 x W680 x D255mm (including protrusions, excluding handle)
■Weight: Approx. 21kg