One Control / LX Tuner with BJF BUFFER

What to expect from a tuner. It should not change the sound significantly and can be used as a buffer at the same time. Easy-to-read display for quick tuning. And most importantly, it can be used with confidence.

At one time, many pedal tuners had built-in buffers.
This is because buffers are built into pedal tuners, which are usually placed at the top of the board, to mitigate subsequent signal attenuation. However, that buffer changed the sound. It is undesirable for a tuner that merely measures the signal to alter the sound.
In response to such voices, true bypass pedal tuners became common. The tuner should not change the sound too much.
However, the advantage of having a buffer built into the tuner is great.
If you can achieve both at the same time, you don't need to stick to true bypass.
In other words, it's important to have a buffer that doesn't change the sound significantly.
However, buffers are not useful in all cases.
For example, in old-style circuits, passing a buffer through a buffer would change the impedance, and an effect that was "only" connected directly to a guitar could change the sound.
Equipped with an ON/OFF switch for the buffer itself so that it can be used when using such an effector or when you do not want to pass the buffer.
This allows it to be used both as true bypass and as buffered bypass.
Equipped with an ON/OFF switch for the buffer itself so that it can be used when using such an effector or when you do not want to pass the buffer.
This allows it to be used both as true bypass and as buffered bypass.
●BJF BUFFER The BJF BUFFER installed in many One Control switchers is an overwhelmingly natural buffer that overturns the image held by many "buffers".
・Set the gain exactly to 1.
・Don't change the sound with the input impedance.
・Do not make the output too strong.
- Minimize noise as much as possible.
・Make sure that the sound does not deteriorate when overloaded.
BJF Buffer, which meets the requirements of BJF's particular buffer, is helping many professionals around the world with their guitar signals.
Even when bypassed, the natural tone is not lost, while at the same time the signal itself is strengthened to prevent attenuation from the effects of cables and terminals, and the output is muted when the tuner is on, allowing comfortable tuning.

In addition, the small housing that does not take up unnecessary space on the pedal board allows you to make the most of the pedal board area. The buffer installed in the One Control LX Tuner with BJF BUFFER is the form of tuner that all guitarists/bassists have sought.