NUX / TAPE ECHO

代理店サイト商品ページ

Variations

This pedal is modeled after the Japanese Space Echo, released in 1974. Its realistic sound is achieved through NUX's unique ""Core Image Technology.""

recommended item

SUPRO / 1313

¥29,800(incl. tax)

An analog delay pedal that modernly recreates the vintage echo sounds of the '60s and '70s. It offers a wide range of soundsfrom warm analog delays to clear tape-echo-style tonesenabling highly expressive sound design. This meticulously crafted pedal was designed by renowned engineer Howard Davis, who also contributed to the development of the Deluxe Memory Man.

Tribute to Space Echo

-UX's unique Core Image Technology reproduces echo sounds realistically. It also has a spring reverb.

-7 types of sound variations using 3 playback heads. You can also switch between MS/BPM (Sub-division). The selected tape head is displayed on the display, so you can see what is selected at a glance.

-SATURATION, which reproduces the distortion and compression of the preamp, and WOW and FLUTTER, which reproduce the fluctuation of the echo sound, can be set individually. It also has a KILL DRY function that turns off the dry signal (original sound) and outputs only the echo sound.

-Time can be set at your feet using tap tempo.

-It also has a self-feedback function that oscillates by pressing and holding the ON switch even if there is no input signal, and an SOS (Sound on Sound) mode (40-second phrase loop).

-It also supports stereo output that reproduces a wider echo sound. It also comes with terminals for connecting an external expression pedal or MIDI device, and a 3.5mm TRS - 5-pin MIDI cable.

■Specifications
・Sampling Rate: 48kHz
・A/D Converter: 32Bit
・Signal Processing: 32Bit
・Frequency Response: 20Hz~20kHz ±1dB
・Input Impedance: 5MΩ
・Maximum Input Level: 1.5Vrms
・Output Impedance: 100Ω
・Maximum Output Level: 1.5Vrms
・System Latency: 1ms
・Dynamic Range: 103dBu/105dBu (A-Weighting)
・THD+N Ratio: 0.0038%＠Input 1Vrms_1kHz, 0.01%＠Input 1.5Vrms_1kHz
・Power: 9V DC (center negative, NUX ACD-006A recommended)
・Current Draw: approximately 100mA, <150mA
・Dimensions: 105(L) x 115(W) x 58(H) mm

Weight: 440 g

Accessories: 3.5mm TRS - 5pinMIDI cable x 2

* USB Type-C cable for PC connection is sold separately. Please prepare a cable capable of data communication.

* Download the editor software ""Tape Echo Edit Software (Mac or Windows)"" from the bottom (Support) of NUX Tape Echo. Also, if you are connecting to a Windows PC, download and install the NUX ASIO Driver from the same site.