Shift Line / Buzz V2

An improved version of Buzz, an overdrive made for bass, has arrived. The distortion/clean volume can be adjusted separately and it has a new EQ section. The improved EQ section now allows it to be used with LINE PUT. The Clean Level knob can boost the clean tone up to 12dB, so you can also use it as a simple booster!

■Bass effector
■Overdrive for bass
■Features
・Excellent response from clean to distortion
・Adjust low and high frequencies with Bass / Treble controls
・Adjust low and high mids with Mid / Bite switch
・Individual dry / wet volume controls that can also boost clean tones
・Easy to use and simple to operate
・Full analog signal circuit
・Compact aluminum housing with beautiful laser-engraved graphics
・Top-mounted jack that is easy to install on a pedal board
■Controls
・Drive Level: Adjusts the volume of the distortion. Turn it to minimum to cut distortion.
・Clean Level: Adjusts the volume of the clean tone (dry). Can also be boosted up to +12dB. Turn it to minimum to cut clean.
・Gain: Adjusts the strength of the distortion.
・Bass: Adjusts the low frequency distortion at 70Hz, ±10dB.
・Treble: Adjusts the high frequency distortion at 10kHz, ±10dB.
・Mid switch: Switches the distortion signal to around 650Hz. +5dB in the upper position, 0dB in the center, -12dB in the lower position. Switches the distortion characteristics from vintage to flat to modern. Cuts specific frequency bands and boosts a wide range to achieve a modern tone.
・Bite switch: Switches the distortion signal to a center of 2.9kHz. +6dB in the upper position, 0dB in the center, -6dB in the lower position. Adjusts the high frequencies of the distortion and changes its presence.
・BYPASS switch True bypass

■INPUT impedance: 1MΩ
■OUTPUT impedance: 100Ω

■Power supply: Standard center negative DC9V adapter *9V batteries cannot be used.
■Current consumption: 60mA
■Dimensions: 110 x 67 x 56 mm