SH / NCS8641

Noise suppression set for guitars and basses! Noises such as "buzzing" and "humming" are unavoidable when it comes to guitars and basses, but they can be improved by properly grounding them. If changing the cable, cleaning around the jack, or reviewing the effects connections doesn't improve the situation, try grounding them!

■Set contents Water-based conductive paint 50ml SONIC / SP-01 Water-Based Shielding Paint Earth wire fixing lug 10 pieces in 1 set MONTREUX / Lug Set Earth wire MONTREUX / Belden #8020 Bus Wire 1 meter solder MONTREUX / Kester 44 1.5m Special washer for pot 2 pieces in 1 set ESP / METAL KNOB NOISE KILLER SP-01 Water-Based Shielding Paint is a conductive paint that is water-based and easy to apply. By applying it inside the circuit, you can earth unnecessary external noise and shield the circuit (brush/paint not included). In cases where there is a cavity in the body back such as Gibson, it is not essential because the pot is in contact with the body, but it is more effective if you use a lug on the applied part and properly connect it to the ground. It may have been applied from the time of manufacture, but there may be unevenness or the paint may have peeled off due to aging. *If you are fixing the pots to the pickguard of a Strat or similar instrument, make sure there is an aluminum shield attached to the back of the pickguard. If there is not, apply MONTREUX / Aluminum Shielding Tape or similar before using the lugs. The METAL KNOB NOISE KILLER is a magical part that improves the shaft noise that occurs when touching a metal knob! Simply remove the knob, pass it over the shaft in a U-shape, and you can eliminate the unpleasant noise. This set will give you results that exceed your expectations. Why not take this opportunity to start repairing and maintaining your guitar or bass at home? Be sure to check to see if your favorite equipment is noise-proofed!