M-AUDIO / M-Track Solo

The M-Track Solo is a portable audio interface that offers full basic functionality, phantom power supply, direct monitoring, and flexible input sources such as microphones, lines, and instruments. It is ideal for music production, as well as high-quality live streaming and podcasts. Comes with a 3-year Sound House warranty!

USB Audio Interface
Combo input with built-in crystal preamp
Equipped with phantom power and instrument input terminal
48kHz, 2-channel USB audio interface

Compact audio interface that enables clear sound quality
M-Track Solo is a portable audio interface in its class. In addition to its compact and simple design, it achieves high-resolution recording at 16bit/48kHz. It is ideal for music production on Mac/PC/iOS devices. Supports recording of any audio source. Equipped with a combo input with a built-in crystal preamp with phantom power, it can also be used for recording from various microphones. It also has a switchable line/instrument input terminal for direct input of electric pianos, drum machines, guitars, basses, etc. It is USB bus-powered, so it is highly portable and does not require an external power adapter, so you can record anywhere. With just M-Track Solo and a laptop, you can podcast, create music, and mix anywhere.

Direct monitoring with headphones
Both the 1/4"" headphone jack and the RCA main output jack allow for zero-latency monitoring of the mic/line/instrument inputs. The USB/Direct switch also allows you to balance the volume between the direct input and the software you use on your computer. These features make it easy to record new parts to add to your project.

Crystal preamps, superior A/D converters and premium components
The Crystal preamps capture the sound from the microphones clearly and with low noise. The M-Track Solo's superior A/D converters also provide a dynamic range that captures the subtle nuances of your performance, allowing you to record in high resolution at 16-bit/48 kHz.

■Main features of M-Track Solo
・2-channel USB audio interface (mac/PC)
・1 high-quality combo input with built-in crystal preamp
・+48V phantom power for condenser microphones
・1/4-inch input terminal for guitar/bass
・Line input for connecting digital pianos, keyboards, etc.
・1/8-inch headphone output terminal/RCA output terminal for easy monitoring
・USB/Direct switch for switching the input signal for monitoring source

■Specifications
・Mic input (balanced XLR)
Frequency response: 20Hz - 20kHz (+0.1dB)
S/N ratio: 109dB (A-weighted)
THD+N: 0.003% (min. gain, 0dBu out, A-weighted)
Preamp EIN: -128dBu (max. gain, 40Ω source, A-weighted)
Gain range: 0dB to +54dB

・Line input (balanced 1/4 inch TRS)
Frequency response: 20Hz-20kHz (+0.1dB)
Input sensitivity: -43dBu
THD: 0.002% (min. gain, 0dBu out, A-weighted)
Gain range: -10dB to +44dB

・Instrument input (unbalanced 1/4 inch TS)
Frequency response: 20Hz-20kHz
THD+N: 0.005% (min. gain, 0dBu out, A-weighted)
Input impedance: 1MΩ
Gain range: -10dB to +44dB

・RCA output
Frequency response: 20Hz - 20kHz (+0.1dB)
S/N ratio: 109dB (A-weighted)
THD: 0.002% (0 dBu out, A-weighted)
Maximum output level: +4dBu

・Headphone output (1/4 inch TRS)
Output: 60mW/Ch, 32Ω
Frequency response: 20Hz - 20kHz (+0.5dB)
THD+N: 0.02% (A-weighted)
S/N ratio: 100dB (A-weighted)

・General
Power supply: USB bus power
Dimensions (W x D x H): 16.4 x 11.4 x 5.5cm
Weight: 0.3kg
Specifications are subject to change without notice.