IK MULTIMEDIA / Z-TONE DI

The ""Z-TONE DI"" is a highly versatile active DI box. It can be switched between active and passive, can turn on/off the tone coloring by changing the mode, and can also be finely adjusted, making it suitable for a variety of situations.

IK Multimedia has studied guitar/bass signal chains for a long time and has come to the conclusion that the impact of the input stage on tone is an important factor that cannot be ignored. The Z-TONE DI is an active DI box equipped with functions inherited from AXE I/O, such as Z-TONE for continuous impedance adjustment, JFET / PURE switch, and active / passive pickup selector. It achieves the best dynamic range and frequency response, and by simply adding it to your effects rig, you can not only get the ideal sound of your instrument, but also provide unprecedented tone creation options.

The Z-TONE DI boasts a dynamic range of 114 dB and a frequency response of 3 Hz - 30 kHz, and is designed to preserve the original tone of your instrument. It can be used as a high-quality DI that is ideal for long cable runs on stage and studio recording, and the nuances of the tone are preserved in detail.

The Z-TONE DI is equipped with the same Z-TONE circuit as the AXE I/O, which has become a hot topic for its continuously adjustable input impedance, and the input impedance can be adjusted between 2.2k ohms (BOLD) and 1M ohms (SHARP). With the Z-TONE DI, you can achieve the best dynamic range and frequency response, and get the perfect sound for any type of guitar, pickup, and playing style.

The Z-TONE DI has a variety of output options. The rear is equipped with an XLR balanced output with a ground lift switch to deal with hum noise, and a 1/4"" standard unbalanced output, allowing you to connect directly to a mixer, interface, etc.

The front is equipped with a LINK OUT terminal for connecting to an effector or amplifier. At the same time as playing the amplifier, you can send the low-noise DI signal from the rear XLR and 1/4"" standard terminals to a mixer or interface, so you can process the amp sound and the DI signal separately.

Main features of the product
- ACTIVE/PASSIVE pickup selection switch.
- PURE mode is transparent and accurate without coloration.

- JFET mode adds harmonics and warmth.

- Z-TONE circuit continuously adjusts input impedance.
- Equipped with -20dB pad switch
- Equipped with 1/4"" standard unbalanced output / XLR balanced output
- In addition to sending signals to effects, it can also be output to a mixer / interface at the same time.
- Equipped with a ground lift switch to suppress hum noise.
- Robust metal chassis that can withstand stage use.
- Made in Italy from design to manufacturing.
- Popular guitar effect and amp modeling apps / software such as AmpliTube 4 are included.

Specifications
Audio specs
- Input / output gain: (GAIN is 0dB, Z-TONE is in SHARP position) Unity gain from 1/4"" input terminal to 1/4"" and XLR output
- Gain range: -8 dB to +8 dB
- Input impedance (in PASSIVE mode): Variable from 1 MΩ to 2.2 kΩ
- Input impedance (in ACTIVE mode): Approx. 20 kΩ
・Output impedance (unbalanced output): 56 Ω
・Output impedance (balanced output): 600 Ω
・Maximum input level before clipping (with 48V phantom power): +13 dBm
・Maximum input level before clipping (with 9V battery): +9 dBm
・Pad: -20 dB
・Dynamic range (input gain 0 dB): 114 dB(A) or more for both outputs
・Total harmonic distortion (balanced output, 1 kHz, +4 dBm input): 0.0033% (PURE), 0.2% (JFET)
・Total harmonic distortion (unbalanced output, 1 kHz, +4 dBm input): 0.00055% (PURE), 0.2% (JFET)
・Frequency response: -1dB from 5 Hz to 30 kHz
・Phase deviation: 20 Hz to 20 kHz 0°±10°

Power supply
- Phantom power: +48V (from balanced output terminal)
　(Current consumption from phantom power: 6.5mA)
- Battery power: 9V (batteries sold separately)

Dimensions and weight
13.7 cm x 15.8 cm x 4.5 cm
950 g

For details on product specifications and operating conditions, please refer to this page (redirects to manufacturer's website).
https://www.ikmultimedia.com/products/ztonedi/index.php?p=specs