HexHider / HH3B1P

A must-have for FLOYDROSE users: the convenient HexHider wrench HH3B1P. A 3mm hex wrench that can adjust FLOYDROSE lock nuts, bridge posts, and string screws. It uses a powerful, patent-pending neodymium magnet that can be easily attached to the back of the tuning peg.

■HexHider Hex Wrench
■Features
- 3mm hex wrench using a powerful neodymium magnet for which a patent is pending
- By using a neodymium magnet, it can be attached to the thread windings on the back of the head
- Can be used immediately when adjustments are required
- Ideal for adjusting the lock nut, bridge post, and string screw of a Floyd-type tremolo
■How to use
- Adjusting the lock nut: The powerful neodymium magnet adheres to the mount screw, allowing you to do it with one hand.
- Adjusting the bridge post: The powerful neodymium magnet allows you to do it with one hand.
- Adjusting the string screw: When replacing strings, loosen the lock nut and strings and lower the arm.
* If you continue working in this state, the wrench will hit the body and the screw and wrench will not turn. Also, please lower the arm as there is a risk of scratching the body
■1 piece

* The image is for illustrative purposes only.