The ADVANCED Accessport 2 is a high-resolution audio amplifier exclusively for iOS devices that uses a built-in DAC and amplifier to play high-resolution 24-bit audio data as lossless audio from audio devices equipped with a Lightning connector, such as iPhones.
■Accessport 2 has separate audio output and charging ports, so you can charge your iOS device with a Lightning connector while playing high-resolution sound.
■Accessport 2 provides enough power to drive headphones/earphones with noiseless, clean sound and high impedance of up to 300ohms.
■The call function of the earphone cable with in-line remote/microphone is maintained even when used through Accessport 2.
*iOS7.2 or later
■Accessport 2 operates by consuming 40mW of power directly from your iOS smart device. No separate battery is required.
■Chipset: 2nd Gen MCU with proprietary firmware
■Maximum supported bit rate: 24bit
■Maximum supported sampling rate: 48kHz
■Signal to noise ratio: 122dB
■Power consumption: 40mW (16ohm)
■Amplification: Maximum 300ohm
■MFi components: C68 + LAM
*Product appearance and specifications are subject to change without notice.
*If you feel unwell while using earphones or headphones, discontinue use immediately.
*If you feel that the product does not suit your skin, discontinue use and consult a doctor.
*When using earphones or headphones, first play at the lowest volume and gradually increase the volume to the appropriate level.
関連商品
商品レビューProduct Review
すべてのレビューを見る