SAMSON / Expedition XP800 Stand + 2 Wireless Microphones

A simple sound system with an output of 400Wx2. Suitable for indoor events with 60 to 100 people. Equipped with microphone, stereo input, and Bluetooth receiver. Can also be used to connect a smartphone or music player and play background music.

■SAMSON/Expedition XP800 x 1 Simple PA set
■CLASSIC PRO/SPS BLACK x 2 Speaker stand
■SAMSON/CR288 Dual Handheld x 1 Wireless microphone/handheld
■CLASSIC PRO/ MSB/BLACK x 2 Microphone stand
■K&M/ MH3 x 2 Microphone holder

＜SAMSON/Expedition XP800＞
■Maximum output: 400W x 2
■Woofer diameter: 8 inches
■Tweeter diameter: 1 inch
■Controls: HF, LF, REVERB, VOL, MASTER VOL
■Input terminals: CH1-4 MIC/LINE mono input (XLR/phone), CH5/6 stereo input (phone/RCA), CH7/8 Stereo input (RCA)
■Output terminals: Speaker out (phone), Monitor out (phone), SUB out (phone)
■Phantom power: 15V
■Maximum output: 400W x 2
■Woofer diameter: 8 inches
■Tweeter diameter: 1 inch
■Controls: HF, LF, REVERB, VOL, MASTER VOL
■Input terminals: CH1-4 MIC/LINE mono input (XLR/phone), CH5/6 stereo input (phone/RCA), CH7/8 stereo input (RCA), USB wireless
■Output terminals: Speaker out (phone), Monitor out (phone), SUB out (phone)
■Phantom power: 15V
■Bluetooth 3.0, A2DP
■Effector: 16 types Digital effects
■Pole diameter: 35mm
■Dimensions (LxDxH): 510mm x 270mm x 485mm
■Weight: 18.8kg

※Sold separately
SMS308 Mixer Stand Holder
Uses microphone stand

＜SAMSON/CR288 Dual Handheld＞
※Complies with new spurious standards
●Features
・Dual channel high performance UHF wireless system
・Included: 1/4"" audio cable, dedicated AC adapter, rack mount kit

●CR288 wireless receiver
・System with excellent radio interference resistance and channel switching
・4 channels can be used simultaneously ※Up to 6 channels can be used under the best conditions
・Output volume control for each channel
・2 x balanced XLR output
・1/4"" unbalanced 2 channel mix output

●CH288 Handheld Transmitter

Q6 Dynamic Microphone Capsule

8 hours continuous use with 2 x AA batteries

91m operating range

■System Overview

-Maximum reach: 100m (when in a straight line with no obstructions)
-Frequency response: 50Hz - 15kHz
-T.H.D.: <1% (@AF 1 kHz, RF 46 dBu)
-Dynamic range: >100 dB A-weighted
-Signal to noise ratio: >85dB
-Operating temperature: -10℃ to +60℃
-Tone key frequency: 32.768kHz

■CH288 Handheld Transmitter

-Microphone element: Q6 Dynamic
-Input gain range: 28dB
-RF output: 10mW EIRP
-Power supply: AA alkaline batteries 2 units

Continuous use time: Approximately 8 hours

Dimensions: 260 mm x 54 mm

Weight: 218 g (excluding batteries)

■CR288 receiver

-Audio output level: +14dBu (Unbalanced), +14dBu (Balanced)

-Audio output impedance: 1kΩ (Unbalanced), 470Ω (Balanced)

-Sensitivity: -100dBm / 20dB sinad

-Image rejection: >50dB

-Power supply: 15VDC 300mA (power adapter included)

-Dimensions: 210 mm x 125 mm x 44 mm

-Weight: 450 g

■Accessories

-Power adapter

-Audio cable (1/4” - 1/4” plug)

-Rack mount bracket (long, short, adapter for connecting two units)

＜CLASSIC PRO/ SPS BLACK＞
Shocking price! Lightweight aluminum speaker stand. Sufficient strength and excellent usability! The pipe diameter with stopper is compatible with 35mm and 38mm, so it is recommended for many speakers.

■Height: 124-220cm
■Load capacity: 60kg
■Weight: 3.75kg
■Maximum leg width of tripod: Approximately 80cm

＜CLASSIC PRO/ MSB/BLACK Boom Microphone Stand＞
■Boom microphone stand
■Dimensions: Height 900-1,600mm
■Boom length 825mm
■Size when legs are opened: φ700mm
■Weight: 2.4kg
■Thread diameter: Includes conversion adapter from 3/8 inch (AKG standard) to 5/8 inch (SHURE standard)

＜K&M/ MH3＞
Microphone holder compatible with wireless microphones. Can be used with any microphone.
■Microphone holder
■85060-000-55
■For wireless microphones
■Diameter 34mm
■Can be attached to microphone stands with 5/8 and 3/8 inch screw diameters.