Portable PA Systems
AMP&SPEAKER SET
HARMAN PA sets
JBL/HARMAN PA set JRX225 pair + XTi2002

JBL / HARMAN PA set JRX225 pair + XTi2002

※画像はXTi 1002となります。

This product is a set of CROWN (AMCRON) / XTi2002 and JRX225. CROWN (AMCRON) / XTi2002 is a power amplifier equipped with a high-performance DSP and has high output performance that can drive large speakers with ease. JRX225 features overwhelming sound pressure and powerful low range that is unique to the double woofer equipped with two 15-inch woofers.

The JRX225 is equipped with two 15-inch woofers. You can get the overwhelming sound pressure and powerful low range that only a double woofer can provide at a reasonable price! Recommended as a main speaker for small to medium-sized live shows, events, clubs, etc. The luxurious carpet finish is also a highlight. The network uses an excellent circuit design equivalent to that of the higher-end model, achieving a smooth connection between high and low ranges.

■Type: 2-way full-range
■Frequency response: (-10 dB): 42Hz - 18kHz, (±3 dB): 62Hz - 13kHz
■Maximum input power: 1000W (program)
■Impedance: 4ohms
■Maximum output sound pressure level: 133dB
■Woofer unit: JBL M115-8A x 2
■Driver: JBL 2414H-C
■Connector: Neutrik Speakon NL-4 (x1), Phone (x1), Parallel
■Stand mount: No
■Size: 46.4W x 109.2H x 43.2Dcm
■Weight: 42.6kg
■Notes:
■Dispersion angle: 90°x 50°
■Crossover frequency: 2.2kHz

■The low-frequency driver of the full-range system uses a large-diameter edge-wound coil. It outputs powerful low frequencies. ■ Equipped with two 380mm low-frequency drivers, it achieves a maximum sound pressure of 133dB SPL.
■ The upper low-frequency driver is responsible for the mid-low range, while the lower low-frequency driver outputs only the low range. It delivers powerful sound.

＜XTi 2002＞
CROWN (AMCRON) / XTi2002 is a power amplifier equipped with a high-performance DSP and has high output performance that can drive large speakers with ease. Various settings such as crossover, equalizer, delay, and limiter can be made on the LCD display. More advanced settings can also be made on a PC using the dedicated software Band Manager 2.
■Type: 2 channels
■Stereo output (2ohms): 1,000W+1,000W
■Stereo output (4ohms): 800W+800W
■Stereo output (8ohms): 450W+450W
■Bridge output (4ohms): 2,000W
■Bridge output (8ohms): 1,600W
■Frequency response: -
■Damping factor: 500 or higher (10Hz to 1kHz)
■Input terminal: XLR
■Output terminal: Neutoic 4P Speakon (NL4MP), binding post
■Power consumption: 750W (1/8 output, pink noise, 4Ω)
■Dimensions: 483 x 89 x 311mm (from mount surface)
■Weight: 8.4kg
■Other:
■Output performance beyond its class
- Equipped with Peak X Plus limiter that allows fine adjustment of threshold, attack, and release to maximize output performance.
- Equipped with a switching power supply that generates little heat and is highly efficient.
■DSP equipped with various audio processing functions

Delay

Equalizer

Crossover

Limiter (Peak X Plus)

Subharmonic synthesizer

Power supply circuit temperature and AC power supply voltage monitoring

Signal generator

Saving presets

■Special software Band Manager 2 for advanced settings

Detailed DSP settings and preset saving can be made from the Band Manager 2 software on a PC connected via USB.

■Flexible input/output section

Input signals can be routed inside the unit.

Also equipped with link terminals for branching input signals.

Two types of output terminals are available: binding posts and Speakon.

■Front panel with excellent operability and air-cooling fan

The front panel is equipped with a large, easy-to-read backlit LCD display.

Also equipped with a lock function to prohibit operation.

Equipped with an air-cooled fan with three selectable rotation speeds.
■Preset data available for JBL PROFESSIONAL speakers.
JBL PROFESSIONAL JRX100/PRX400/STX800 */VRX900 (XTi6002 only)

[002 Series Changes]
- The number of presets has increased from 20 to 49.
- Equipped with a subharmonic synthesizer that synthesizes ultra-low frequencies based on the input signal and outputs powerful deep bass.
- The limiter is no longer limited to low/mid/high, but now allows fine-tuning of threshold, attack, and release settings for each.

I compared some PA speakers

I was thinking about power amplifier recommendations!!

商品レビューProduct Review

総合評価Avg. Rating：(0)
レビュー数Reviews：0

5		0件
4		0件
3		0件
2		0件
1		0件

JBL
HARMAN PA set JRX225 pair + XTi2002

Item ID:266232

Regular Price：¥289,600(incl. tax)

¥238,000(incl. tax)

23,800Pt(10%)Detail

2,380Pts
通常ポイント
21,420Pts
ポイント10倍キャンペーン
0Pts
Coupon Point
23,800Pts
Total

限定特価

在庫あり In Stock

Qty

About delivery for oversized items

This item exceeds the standard size/weight so that a specialized shipping company will deliver it.
Please check each item and enter check box.

Delivery on weekends and public holidays cannot be specified.
Delivery time cannot be specified. Delivery will be between 9:00 and 17:00.
The item will be handed over at the delivery vehicle's stop (on the vehicle). The recipient may be asked to help unload the item.
If the delivery destination is set to a location where the delivery vehicle cannot enter or stop, the item may be handed over on the nearest main street or delivery store.
If your order includes non-standard size items, please use a payment method other than cash on delivery.
Items other than non-standard size items will be shipped by regular mail.

Estimated delivery time from shipping date

Hokkaido	4days
Tohoku	5days
Honshu	4days
Southern Kanto	3days
Shikoku	3days
Kyushu	5days
Okinawa	10days

* During consecutive holidays and the New Year holidays, we may not be able to meet your desired delivery date due to increased logistics volume and traffic conditions. Thank you for being so understanding.

For more information, please check here.

Cancel