JBL / HARMAN PA set JRX212 pair + XTi1002

This special set combines the JBL/JRX212, a compact speaker with a 12-inch woofer that achieves a maximum sound pressure of 128dB, with the CROWN (AMCRON)/XTi1002, a high-quality, ultra-lightweight power amplifier equipped with the latest DSP.

■HARMAN PA set
■PA speaker: JRX212 pair
■Power amplifier: XTi1002

＜JRX212＞
The JRX212 is a compact type with a 12-inch woofer that achieves a maximum sound pressure of 128dB. This model allows you to enjoy JBL sound up close. It can also be stand-mounted, making it suitable for a variety of uses.

■Type: 2-way full range
■Frequency response: (-10 dB): 60Hz - 20kHz
■Maximum input power: 500W (program)
■Impedance: 8ohms
■Maximum output sound pressure level: 128dB
■Woofer unit: JBL M112-8A
■Driver: JBL 2414H-C
■Connector: Neutrik Speakon NL-4 (x1), Phone (x1), Parallel
■Stand mount: Yes (35mm)
■Dimensions: W39.9xH58.4xD32.5
■Weight: 19.5kg
■Notes:
■Dispersion angle: 90°x 50°
■Crossover frequency: 2.1kHz

＜XTi1002＞
CROWN(AMCRON)/XTi1002 is a power amplifier equipped with a high-performance DSP and has high output performance that can drive large speakers with ease. Various settings such as crossover, equalizer, delay, and limiter can be made on the LCD display. More advanced settings are also possible on a PC by using the dedicated software Band Manager 2.

■Type: 2 channels
■Stereo output (2ohms): ×
■Stereo output (4ohms): 500W+500W
■Stereo output (8ohms): 275W+ 275W
■Bridge output (4ohms): ×
■Bridge output (8ohms): 1,000W
■Frequency response: -
■Damping factor: 500 or more (10Hz to 1kHz)
■Input terminal: XLR
■Output terminal: Neutoic 4P Speakon (NL4MP), binding post
■Power consumption: 480W (1/8 output, pink noise, 4Ω)
■Dimensions: 483×89×311mm (from mount surface)
■Weight: 8.4kg
■Other:
■Frequency response (20Hz to 20kHz, 1W, 4Ω): +0/－1dB
■Signal-to-noise ratio (1kHz or less, 8Ω, A-weighted): 100dB
■Input impedance: 20kΩ (balanced), 10kΩ (unbalanced)
■Input sensitivity: 1.4V
■Network connector: USB
■Indicators: Signal, -10, -20, Ready, Clip, Thermal, Power
■Power supply: AC100V, 50/60Hz
■Output performance beyond its class
- Equipped with a Peak X Plus limiter that allows fine-tuning of threshold, attack, and release to maximize output performance.
- Equipped with a switching power supply that generates little heat and is highly efficient.
■DSP equipped with various audio processing functions

Delay

Equalizer

Crossover

Limiter (Peak X Plus)

Subharmonic synthesizer

Power supply circuit temperature and AC power supply voltage monitoring

Signal generator

Saving presets

■Special software Band Manager 2 for advanced settings

Detailed DSP settings and preset saving can be made from the Band Manager 2 software on a PC connected via USB.

■Flexible input/output section

Input signals can be routed inside the unit.

Also equipped with link terminals for branching input signals.

Two types of output terminals are available: binding posts and Speakon.

■Front panel with excellent operability and air-cooling fan

The front panel is equipped with a large, easy-to-read backlit LCD display.

Also equipped with a lock function to prohibit operation.

Equipped with an air-cooled fan with three selectable rotation speeds.
■Preset data available for JBL PROFESSIONAL speakers.
JBL PROFESSIONAL JRX100/PRX400/STX800 */VRX900 (XTi6002 only)

[002 Series Changes]
- The number of presets has increased from 20 to 49.
- Equipped with a subharmonic synthesizer that synthesizes ultra-low frequencies based on the input signal and outputs powerful deep bass.
- The limiter is no longer limited to low/mid/high, but now allows fine-tuning of threshold, attack, and release settings for each.