JBL / HARMAN PA set JRX225 pair + XLS2502

This special set combines the JBL/JRX225, which is equipped with two 15-inch woofers that output overwhelming low frequencies, with the CROWN (AMCRON)/XLS2502, a high-quality, ultra-lightweight power amplifier equipped with the latest DSP.

■HARMAN PA set
■PA speaker: JRX225 pair
■Power amplifier: XLS2502

＜JRX225＞
The JRX225 is equipped with two 15-inch woofers. You can get the overwhelming sound pressure and powerful low range that only a double woofer can provide at a reasonable price! Recommended as a main speaker for small to medium-sized live shows, events, clubs, etc. The luxurious carpet finish is also a highlight. The network uses an excellent circuit design equivalent to that of the higher-end model, achieving a smooth connection between high and low ranges.

■Type: 2-way full-range
■Frequency response: (-10 dB): 42Hz - 18kHz, (±3 dB): 62Hz - 13kHz
■Maximum input power: 1000W (program)
■Impedance: 4ohms
■Maximum output sound pressure level: 133dB
■Woofer unit: JBL M115-8A x 2
■Driver: JBL 2414H-C
■Connector: Neutrik Speakon NL-4 (x1), Phone (x1), Parallel
■Stand mount: No
■Size: 46.4W x 109.2H x 43.2Dcm
■Weight: 42.6kg
■Notes:
■Dispersion angle: 90°x 50°
■Crossover frequency: 2.2kHz

■The low-frequency driver of the full-range system uses a large-diameter edge-wound coil. It outputs powerful low frequencies. ■ Equipped with two 380mm low-frequency drivers, achieving a maximum sound pressure of 133dB SPL.
■ The upper low-frequency driver is responsible for the mid-low range, while the lower low-frequency driver outputs only the low range. Achieves powerful sound.

＜XLS2502＞
CROWN (AMCRON) / XLS2502 is a high-quality, ultra-lightweight power amplifier equipped with the latest DSP. Crossover settings with three types of filters can be set on the large LCD display with excellent visibility. Class-D operation allows you to drive both the main speaker and the subwoofer efficiently.

■Type: 2 channels
■Stereo output (2ohms): 1,200W+1,200W
■Stereo output (4ohms): 775W+775W
■Stereo output (8ohms): 440W+440W
■Bridge output (4ohms): 2,400W
■Bridge output (8ohms): 1,550W
■Damping factor: 200 or more
■Input terminals: XLR, RCA, standard phone jack
■Output terminals: 4P Speakon x 2, binding post
■Power consumption: 260W (1/8 output, pink noise, 2Ω)
■Dimensions: W48.3 x H8.9 x D22.8cm
■Weight: 5kg

＜XLS DriveCore 2 Series＞
This is the next-generation model that inherits the functions of the well-established XLS series. Improvements have been made, including to the appearance, and the DSP processing power and operability have been improved. All models are lightweight, weighing less than 5kg, reducing the burden of transportation and installation.

■DriveCore achieves weight reduction without compromising sound quality
Equipped with ""DriveCore"", a custom IC that integrates functions such as high-precision clock, modulation, error amplification, and feedback, which are the heart of the amplification circuit, into a single chip. Parts have been reduced to the minimum without compromising power or sound quality.
The power supply unit uses a lightweight, highly efficient switching power supply.
All models are lightweight, weighing less than 5kg, and are highly portable.
■Output power beyond its class
Class-D operation efficiently drives even high-load subwoofers.
Equipped with a Peakx limiter, it maximizes output performance while protecting the speakers.
■Filter setting possible with powerful DSP
Adopts PureBand crossover system with 24dB/oct Linkwitz-Riley filter. Any crossover point can be set every 1/12 oct in the range of 30Hz to 3kHz.
Filter types can be selected from no filter, low pass, high pass, and band pass.
■ Flexible input and output
Three types of input terminals are equipped: XLR, standard phone, and RCA. Input sensitivity can be selected from 1.4V and 0.775V.
Output terminals are equipped with Speakon and binding posts.
■ Balanced installation of necessary functions
Equipped with a backlit LCD display on the front panel. Including the indicator LED, it can be turned on/off by setting. In addition, a lock function that prohibits operation of the front panel is also available.
A status signal is output from the rear panel to check normal operation from a remote location.
It can be set to sleep mode to reduce power consumption by external contact.
Equipped with an air-cooled fan to efficiently cool the inside of the main unit.
■ Enlarged LCD display
The size is larger than the previous model. The menu structure has also been revised to significantly improve operability.
■ AUX terminal
The left pin can be used for sleep mode to reduce power consumption by external contact.
The right pin outputs a status signal to remotely verify proper operation.