HOTONE / Binary Cab

Cabinet simulator using HOTONE's unique modeling technology CDCM

It's packed with ""power amp → cabinet → microphone & microphone tech"".

The Binary series uses HOTONE's proprietary modeling technology ""CDCM"" like the XTOMP, and is designed to allow each model to use each effect category more deeply, and allows you to make full use of preset storage and recall.

IR (Impulse Response) was used for convolution reverb, which generates reverb, a reverberation effect, by performing a convolution calculation between the response (characteristics) data to a narrow impulse signal and the sound signal. This IR CAB uses the same technology to reproduce speaker cabinets.

Binary IR CAB allows you to select from 100 IR models (for guitar and bass) of various new and old models that are loaded. You can also load third-party IR files from USB. The files are mono WAV files, 16-bit/44.1kHz-24-bit/48kHz.
Resolution: 1024 samples
Time length: 20ms
When loading an IR file in the Binary Editor APP, the file will be automatically converted.

To play a realistic guitar sound in line, it is necessary to reproduce the setup of the cabinet, microphone, and power amplifier. In order to reproduce the sound of an actual cabinet with a microphone, we have added microphone and power amplifier emulations using CDCM. In addition to the 10 famous microphones, the microphone emulation also allows you to set the recording position in 3-D. In addition, it also features 8 types of power amplifiers, presence control, and room emulation.

Family model using XTOMP technology

High sound quality achieved by dual DSP platform

24-bit A/D/A conversion with 110dB S/N ratio

100 types of IR cabinet simulation

10 types of CDCM-based microphone simulation

3D (X, Y, Z) microphone positioning settings & room simulation

8 types of CDCM-based power amp simulation with presence control

Aux in & Headphone out

3rd party IR files can be used

Equipped with a USB port that allows firmware updates, free PC/Mac software for algorithm loading and management. 100 presets

AD/DA: 24-bit A/D/A

Sampling rate: 48kHz (Binary IR Cab/44.1kHz)

Frequency response: 20Hz-20kHz

S/N: Up to 110dB

Power supply: DC 9V center negative

Current consumption: 200mA or more

Dimensions: 121mm (D) x 72mm (W) x 47mm (H)

Weight: 340g