MONTREUX / 892

メーカー商品ページ

Variations

CTS control pot, inch size split shaft.

■ PUSH-PULL Potentiometer
■ 250kΩ
■ A-Curve
■ Inch Size
■ Split Shaft

~From the Manufacturer~
CTS boasts high-quality and reliable control potentiometers. Introducing the new DPDT (double-pole, double-throw, 2-circuit, 2-contact) switch pot. The contacts are located on the side, not the back, and can be installed without modification, as long as the pot is approximately 1 inch (=25.4mm) deep. This DPDT switch allows for a wide variety of wiring options, including humbucker coil tapping and pickup switching. The control pot and switch circuits are separate. The Audio Taper offers smooth and accurate response, allowing you to smoothly change from 0 to 10 without sudden changes when turning the knob, delivering performance unmatched by cheaper potentiometers. Split shafts are compatible with 24-thread inch knobs, while solid shafts are compatible with knobs with side setscrews. The long shaft is designed for Les Paul® and other solid-body guitars with carved tops. Includes flat washer, lock washer, and height adjustment nut.

(Split Shaft)
Diameter: 0.235"" inch (5.95mm)
Thread Height: 3/8"" inch (9.52mm)
Thread Height (Long Shaft): 3/8"" inch (9.52mm)

Thread Size (All Models): 3/8"" x 32 (Same inch size as standard CTS)
Required Counterbore Width: 3/8"" inch (9.52mm)
Required Counterbore Depth: 1"" inch (25.4mm)

Images are for illustrative purposes only.