CROWN / XLS2002

CROWN (AMCRON) / XLS2002 is a high-quality, ultra-light power amplifier equipped with the latest DSP. A crossover setting with three types of filters is possible on a large liquid crystal display with excellent visibility. By Class-D operation, both the main speaker and the subwoofer can be driven efficiently.

■ Type: 2 channels
■ Stereo output (2ohms): 1,050W + 1,050W
■ Stereo output (4ohms): 650W + 650W
■ Stereo output (8ohms): 375W + 375W
■ Bridge output (4ohms): 2,100W
■ Bridge output (8ohms): 1,300W
■ Dumping factor: 200 or more
■ Input terminal: XLR, RCA, standard phone jack
■ Output terminal: 4P Speakon x 2, binding post
■ Power consumption: 260W (1/8 output, pink noise, 2Ω)
■ Dimensions: W48.3 × H8.9 × D22.8cm
■ Weight: 5kg


This is a next-generation model that inherits the functions of the well-established XLS series. Improvements including the appearance have been made, and the processing power and operability of the DSP have been improved. All models have a lightweight design of 5kg or less to reduce the burden of transportation and installation.

■ DriveCore realizes weight reduction without compromising sound quality
Equipped with "DriveCore", a custom IC that integrates functions such as high-precision clock, modulation, error amplification, and feedback on a single chip, which is the heart of the amplifier circuit. Parts are reduced to the maximum without compromising power and sound quality.
The power supply adopts a lightweight and highly efficient switching power supply.
All models are light at 5kg or less and have excellent portability.
■ Output power beyond class
Class-D operation efficiently drives high-load subwoofers.
The Peakx limiter is installed to maximize the output performance while protecting the speakers.
■ Filter setting is possible by powerful DSP
PureBand crossover system with 24dB / oct Linkwitz-Riley filter. Any crossover point can be set every 1/12 oct within the range of 30Hz to 3kHz.
The type of filter can be selected from no filter, low pass, high pass and band pass.
■ Flexible input / output
Equipped with three types of input terminals: XLR, standard phone, and RCA. Input sensitivity can be selected from 1.4V and 0.775V.
The output terminal has a speaker and a binding post.
■ Equipped with necessary functions in good balance
Equipped with a liquid crystal display with backlight on the front panel. ON / OFF is possible by setting including LED of indicator. A lock function that prohibits operation of the front panel is also available.
A status signal is output from the rear panel to confirm normal operation from a remote location.
You can set the sleep mode to reduce power consumption with external contacts.
Equipped with an air cooling fan to efficiently cool the inside of the main unit.
■ Liquid crystal display with increased size
The size is larger than the conventional model. The menu structure has also been reviewed and operability has been greatly improved.
■ AUX terminal
The left pin can be used for sleep mode to reduce power consumption with external contacts.
The right pin outputs a status signal from a remote location to confirm normal operation.