RADIAL / Trim-Two

This passive line-level DI is ideal for DJ equipment, AV equipment, etc. It features a volume control, making it convenient for quick adjustments.

[直輸入品][Direct Import]

■Features
- Stereo DI box ideal for high-output line-level equipment
- Built-in volume control
- Flat frequency response from 20Hz to 20kHz
- Three input terminals (RCA / 1/4"" phone / 3.5mm) that can also be used as a through terminal
- Made in Canada

Trim Two is a passive DI box ideal for consumer line-level equipment. Its distinctive feature is its input level control. Its easily accessible front panel allows for quick volume adjustments on stage. It's ideal for keyboards, DJ equipment, AV equipment, computers, tablets, and more.

■Superior Sound Quality
The circuitry is passive, with a flat frequency response from 20Hz to 20kHz. With a wide headroom of up to +15dB, it's compatible with a wide range of devices, from consumer devices with a -10dB output to professional audio equipment.

■Input (Thru) Terminals & Switch
The input terminals include 1/4-inch phone (L/R), RCA (L/R), and 3.5mm stereo. These terminals are connected in parallel and can also be used as thru terminals for monitor speakers. The MONO/SUM switch allows you to mix stereo sources to mono. This allows you to reduce the channels sent to the PA or reduce the mono output. It can also be used as a splitter with two balanced outputs.

■Eliminates noise caused by ground loops
Equipped with two high-sounding Eclipse transformers, it provides isolation between the input and output of the balanced signal. This prevents hum and buzz caused by ground loops. It also features a ground lift switch.

■Professional Construction
This unit is extremely tough and can withstand the rigors of professional use. The steel case provides insulation from external noise and is thick and sturdy at 14 gauge. The unique bookend design with protruding edges around the switches provides excellent protection for the controls and switches. The internal frame is resistant to impacts and twisting, and the circuit board is designed to prevent solder peeling. These various features ensure a clear signal without hum. Plus, it's made in Canada for your peace of mind.

■Specifications
Audio circuit type: Passive, transformer based
Number of channels: Dual channel (stereo)
Frequency response: 20Hz to 20KHz
Dynamic range: >100dB
Maximum input: +20dB @ 20Hz
Total harmonic distortion: 0.009%
Phase deviation: <10°
Input impedance: 10K ?, unbalanced
Output impedance: 2.8K ?, balanced

■Features
Transformer: Custom
Shield: Copper foil
Input pad: Variable level control
Mono sum: Merges left + right sources to mono
Ground lift: Disconnects pin-1 @ both XLR outputs
XLR configuration: AES standard (pin-2 Hot)
Connectors: 1/4"", RCA and 3.5mm input, XLR-M ouput

■General
Construction: 14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size: (W x H x D) 84 x 127 x 48mm (3.3"" x 5.0"" x 2"")
Weight: 0.70 kg (1.55 lbs)
Shipping size: (W x H x D) 102 x 76 x 165mm (4"" x 3"" x 6.5"")
Shipping weight: .87 kg (1.92 lbs)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C