WHIRLWIND / IMP COMBINER

The WHIRLWIND / IMP COMBINER is a passive combiner that combines the above into one.

■ Combiner
■ Passive
■ 2XLR to 1XLR
■ Microphone Level
■ With Polarity Reverse Switch
■ Output Impedance: 150 Ohms
■ Operating Level: -50dBu to -10dBu
■ Frequency Response: 20Hz-20kHz ±1dB

・Combines two low-impedance microphone signals into a single low-impedance output.
・A phase reverse switch is provided on Input 2 for phase reversal.

■ Input 1/2
Connects low-impedance, balanced signals such as microphones. XLR female connector

■ Output
Outputs a balanced, low-impedance (150 ohm) signal for connection to a mixing console, workstation, etc. XLR male connector

■ Phase/Reverse Switch
This switch reverses the polarity of Input 2. Use this when you need to shift the phase of two microphones by 180 degrees.
(For example, using a pair of microphones above and below a snare drum or before and after an open-back guitar amp.)