TASCAM / AV-P2803 Power Distributor

The AV-P series is a standard power distributor/conditioner. Equipped with two types of noise filters and a polarity checker, this model aims to improve the sound quality of audio equipment.

■Equipped with a 3P outlet, it allows for long-term sequence operation and external control. A power distributor/conditioner exclusively for use in Japan.

The AV-P2803 is a power distributor/conditioner for facilities that uses a 3P outlet and is capable of long-term sequence operation and external control, supporting systems including network equipment.
The sequence function's delay time can be selected from three presets, including a 5-minute or 5-second combination, making it compatible with systems including network equipment with long startup times. It also comes equipped with an external control terminal, allowing for daisy chaining of up to 10 units, on/off control via an external switch, and an emergency broadcast function that cuts off the power supply in response to an emergency signal input from the equipment. Furthermore, the 15A breaker has a button-type design that allows for immediate recovery.

■Feature List
o All front and rear panels feature 3-pin outlets
o Two unswitched (non-interlocking) outlets on the front panel
o Two unswitched (non-interlocking) outlets on the rear panel
o Switched (interlocking with delayed operation) outlets on the rear panel: Timing 1/2/3 Two ports each (6 ports total)

o Three-stage sequence (delay) operation function with adjustable operation time (5 minutes or 5 seconds)

o External control possible via external control terminal

o Remote/Local switch that can be set to ""enable/disable"" external control and can also be used to prevent accidental operation

o Up to 10 units can be daisy-chained

o Emergency broadcast function that cuts off power supply when an emergency signal is input

o Built-in surge noise filter and line noise filter for clean power supply

o 301mm long body for easy setup, 3m power cable

o Voltage display for checking power status

o A single unit can supply up to 1490W, enough to power 10 audio devices

o 15A circuit breaker with reset switch

o Guarded power switch to prevent accidental switch operation

o Power polarity checker for noise reduction

o 1U rack mount size

■Specifications
Power Supply: AC100V, 50/60Hz

Maximum Rated Current 1490W (14.9A)
power outlet
DELAY SWITCHED (interlocking) rear 3P x 6 ports (TIMING 1/2/3 2 ports each)
UNWSITCHED (non-interlocking) Front 3P x 2 ports, rear 3P x 2 ports
Power ON delay time
Pattern A Main power ON- TIMING 1: 1 second, TIMING 1-2: 5 seconds, TIMING 2-3: 5 seconds
Pattern B Main power ON- TIMING 1: 1 second, TIMING 1-2: 5 seconds, TIMING 2-3: 5 minutes
Pattern C Main power ON- TIMING 1: 1 second, TIMING 1-2: 5 minutes, TIMING 2-3: 5 seconds
Power OFF delay time
Common to patterns A, B, and C Main power OFF- TIMING Timing 3: Within 1 second, Timing 3-2: 5 seconds, Timing 2-1: 5 seconds
CONTROL terminal
Rated input voltage: 5V-24V
Rated input current: 16mA-25mA
Output voltage: 10V-12V
Filter: Surge noise filter, line noise filter
Polarity checker: Neon lamp indicator
Circuit breaker: 15A
Power cord: 3m (non-detachable)
Power consumption: 4.3W
Dimensions: 482.6(W) x 45(H) x 301.5(D) mm
Weight: 4.0kg
Accessories: Rack mount screw kit, 3P-2P conversion adapter, warranty card, instruction manual