Neo Instruments / VENTILATOR II

The rotary cabinet simulator ""VENTILATOR,"" released in 2010, has been a hot topic around the world since its introduction. Even after production was discontinued, praise continued to grow, leading to eager anticipation for its return, and now the next-generation model, ""VENTILATOR II,"" is finally here.

The VENTILATOR II features a chic black body wrapped in a sturdy metal chassis and numerous parameters, sure to meet the high expectations of many players even more than the original model.

Vibrato, created by the Doppler effect caused by rotating the speaker itself, is the most distinctive feature of the organ sound and can be heard in many organ players' live performances and recordings.

The ""Leslie Speaker,"" developed by the American company Leslie in the 1940s, is synonymous with this sound. However, the speaker's housing is large, inconvenient to transport, and requires maintenance.

Neo Instruments thoroughly researched the Leslie 122's vibrato, rotation sound, changes when switching rotation speeds, vacuum tube amp overdrive, and cabinet resonance, and created the original VENTILATOR effect pedal.

Based on user feedback on the original model, the VENTILATOR II is easier to use and more advanced.

■ Main Specifications

・Signal Processing: 32-bit SHARC DSP
・AD Conversion: 48kHz/24-bit
・DA Conversion: 48kHz/24-bit
・Noise Level: -80 dBA
・Input Sensitivity: -10 dBV (Hi) / 0 dBV (Lo)
・Input Impedance: 1MΩ
・Output Level: +6 dBV
・Output Impedance: 100Ω
・Recommended Load Impedance: 10kΩ or greater
・Switches: Bypass, Slow/Fast, Stop, Input Gain Select
・Parameters: Fast Speed, Slow Speed, Balance, Acceleration, Drive, Mode (Guitar 1/Guitar 2/Key),
Mix/Distance Lo, Mix/Distance Hi, Level, Remote Select (Switch/Pedal Speed/Pedal Mix)
・Connections: In L, In R/Mono, Out L, Out R/Mono, Remote, 12V DC
- Power Supply: 9VDC/500mA DC, center negative
- Current Consumption: 300mA or less
- Dimensions: 160 x 143 x 55 mm (W x D x H)
- Weight: 1.1 kg

Compatible Power Supplies

This product (serial number: E2309280 or later) does not include a power supply. Please purchase one that meets the following specifications (battery operation is not supported).

9V DC

500 mA

2.1 x 5.5 mm connector

Center negative