JBL / Control 14C/T

The Control 14C/T is a ceiling-mounted speaker that delivers uniform sound over a wide area. The low-frequency driver uses a lightweight, heat-resistant aluminum bobbin and a voice coil with excellent heat resistance. By reducing power compression, it enables continuous playback at high volume. A single cable supports both low and high impedance connections. It is available in white.

■In-ceiling Speaker
■Coaxial 2-way full-range
■4"" polypropylene cone woofer
■19mm soft dome tweeter
■60W, 8Ω
■25W, 12.5W, 6.3W @ 70V or 100V
■Frequency Response: 74 Hz - 20 kHz (-10dB)
■Sensitivity: 87dB
■Polarization Pattern: 120° conical
■Sound Output: 102dB @ 1 m (3.3 ft) average, 108dB peak
■Input Connector: 4-pin screw terminal
■Dimensions: 196 x 196 x 181 mm
■Ceiling Cutout Size: 170mm
■2.2kg/unit
■Pair
■White

■These in-ceiling speakers deliver JBL PROFESSIONAL sound with consistent tone across a wide area.
■Control The 10 Series features an optimal combination of various technologies to deliver the superior sound you expect from JBL PROFESSIONAL. It delivers clear announcements and cozy background music with consistent sound quality across a wide area. It creates a comfortable acoustic space in small- to medium-sized facilities such as stores, hotels, conference rooms, and educational facilities.
■ An optimal combination of many technologies delivers superior sound
- Equipped with a coaxial speaker unit that places a high-frequency driver at the center of a low-frequency driver.
- The low-frequency driver uses a lightweight, heat-resistant aluminum bobbin and a voice coil with excellent heat resistance. Even with continuous high sound pressure, changes in sound quality are minimal.
- The high-frequency driver uses a center driver made of a material with excellent damping characteristics. The Control12C/T and Control14C/T feature a wide coverage angle, allowing a single unit to cover a wide area. Since fewer units are required, they can be installed in venues with strict budget constraints. The Control16C/T and Control18C/T achieve a high maximum sound pressure level, making them ideal for use in high-ceiling spaces and noisy locations.

Low impedance In addition to impedance connections, the built-in transformer also allows for high-impedance connections. A single power amplifier can efficiently drive multiple speakers, minimizing degradation of sound quality during long-distance transmission.

- The speaker surface is made of a flame-retardant and UV-resistant material, while the cone is made of polypropylene and the edge around the cone is made of butyl rubber, ensuring high durability even in humid environments.

- Available in white and black (-BK), the body edge and grille can be painted to match the interior of the installation location. A shield is also included to protect the driver during painting.

- Can be installed quickly and easily from inside the room without going into the attic.

- Can be installed in the ceiling. It comes with an opening template for convenient drilling holes, as well as C-shaped support brackets and support rails for reinforcing the ceiling.
The connection terminals use Euroblock connectors, which allow for detachable terminals only, allowing wiring without lifting the speaker. A loop-through terminal is also provided for outputting signals to other speakers.

- Equipped with a coaxial speaker unit with a high-frequency driver positioned at the center of a low-frequency driver. High-quality sound is output from a compact body.
- With a wide coverage angle of 120°, a single cable can cover a wide area.
- Supports both low and high impedance connections with a single cable.
- Available in white and black (-BK).