Cymatic Audio / uTrack24

This 24-channel, 1U rack-mountable multitrack recorder can record to a USB-connected HDD drive. Equipped with 24x24 balanced inputs and outputs, it's ideal for a wide range of recording needs, from band performances to live recordings. It can also be used as a 24-in/24-out 96kHz USB audio interface for DAWs, offering incredible cost performance.

■Multitrack Recorder

- D-sub 25-pin (TASCAM format), analog balanced input/output*1
- Optional 24-channel digital input/output slot (future expansion slot)
- 24-bit/96kHz sampling rate (24 channels 24-bit 44.1/48 kHz, 8 channels 96 kHz)
- Direct recording to an HDD drive*2 connected to the front-panel USB port
- Tri-color LED hardware meters for each input channel
- Large, easy-to-operate transport control buttons
- The built-in DSP mixer outputs a stereo internal mix (level, pan, mute, and solo controls) to the front-panel headphone jack. When adjusting the internal mix, 24 input level meters are displayed as 24-segment hardware meters, allowing for accurate mixing even without external meters.
- Two uTrack24 units can be synchronized and used as a 48-track recorder. (Supported via a firmware update)
- RJ-45 network connection will enable control from dedicated external software. (Currently unused)
- External synchronization via BNC word clock input/output
- Large LCD screen, dedicated menu buttons, and rotary encoder with pushbuttons allow for quick setup.


*1 Input/output (D-sub 25-pin) cables are not included. Purchase them separately.
*2 This product does not include built-in storage media. (Separate USB hard drive required.) Be sure to use a USB HDD (hard drive). Use of USB flash drives (including SSDs) is not recommended.