Turbosound / iQ10

Turbosound 2-way powered speaker. Suitable for a wide range of SR applications, including speech and music, in both portable and fixed installations. 10-inch woofer, 2500W.

■2-way
■Powered speaker
■Frequency response
　55 Hz - 18 kHz ±3 dB
　50 Hz - 20 kHz -10 dB
■Directivity: 90° H x 90° V @ -6 dB points
■Maximum SPL: 123 dB peak
■Woofer: 1 x 10"" (256 mm) LF driver
■Driver: 1 x 1"" (25.4 mm) HF compression driver
■Limiter: Independent HF, LF, peak, and rms
■Maximum output power: 2,500 W
■Output circuit: Class-D
■Short circuit, open circuit, thermal
■Input connectors: 2 x combo jack/XLR
■Input sensitivity: Line +4 dBu, mic -22 dBu, switchable
■Input impedance: 20 kΩ unbalanced, 40 kΩ balanced Maximum Input Level: +21 dBu
Output Connectors: 2 x XLR Linked to Input
Mix Output Connectors: XLR, Balanced
Output Impedance: 100 Ω unbalanced, 200 Ω balanced
Ultranet Input/Link: 2 x RJ45
Power Supply: Neutrik powerCON input 20A and link 15A
DSP: Rotary push-encoder, Buttons for PROCESS, SETUP, EXIT, ENTER
Mixer Section: 2 x Gain Controls (Channels A and B), 2 x Line/Mic Switch
Factory EQ Presets: Positioning, Sound Mode, Sound Modeling, FBQ
Display: LCD 128 x 32, Blue Backlit
Delay: 0 - 300 ms
Equalization: High and Low Shelving EQ, 2 x Parametric EQ
■Limiter；Zero attack input limiter
■Presets: 20 total presets, 19 user-definable
■Crossover: High Pass L-R 24 dB/oct
■Protection: Lock-out function for all settings
■Digital processing
A/D conversion: 24-bit, 44.1/48kHz sample rate
　Converter type：24-bit,delta-sigma
■System
　Signal：16 channels
■Latency: <0.9 ms
■Dynamic range: typical 92 dB
■Cabling
Cables: Shielded CAT5
Cable length: max. 246 ft / 75 m recommended
■Power consumption: 150W @ 1/8 max power
■Voltage (fuses):100 V~, 50/60Hz (T 15A H 250V)
■Dimensions HWD: 526 x 324 x 316 mm
■Net weight: 17.2 kg
■Construction: Injection-moulded polypropylene enclosure
■Finish: Black painted
■Grille: Powder coated perforated steel
■Flying hardware: M10 x 3 points
■Accessories: IQ10-WB Steel wall bracket