SHURE / QLXD4J=-JB

This half-rack size, single-channel diversity receiver features 24-bit digital wireless technology that transmits a flat frequency range from 20Hz to 20kHz. It uses AES-256-bit encryption for highly secure wireless operation. Its automatic frequency search and infrared link functions allow for quick setup.

Number of Receiving Channels: 1
Receiving Frequency: Type B (806-810MHz)
Antenna Input: Effective Impedance 50Ω
Connector: BNC
RF Sensitivity: -97dB@10-5 BER

Audio Output
Type: Balanced (XLR 3-pin, male) Pseudo-balanced (phone jack)
Impedance: Balanced/Pseudo-balanced: 100Ω Unbalanced: 50Ω
Maximum Output Level: Balanced: +18dBV (line), -12dBV (mic), +12dBC (phone)
Network: Interface: Single-port Ethernet 10/100Mbps, Maximum Cable Length: 100m
*The usable cable length varies depending on the cable type and connected device.
Power Supply: Included AC adapter (AC 100V, 50/60Hz)
Dimensions & Weight: 197mm W x 41mm H x 151mm D, 777g (excluding antenna)
Accessories: 2 x 1/2-wave antennas*, AC adapter, 1 x large and 1 x small rack mount bracket, 2 x 50Ω coaxial cables (approx. 50cm), 2 x BNC bulkhead adapters
*The included 1/2-wave antennas are as follows:
QLXD4J-JB: UA8-740-814

*If you purchased the transmitter separately and are unable to connect to the receiver, this is likely due to differences in the firmware between the receiver and transmitter. Please refer to the instructions below and update the firmware.
■ Shure Update Utility Quick Start Guide

https://pubs.shure.com/quickstart/Shure-Update-Utility/ja-JP
■ Download the Update Utility here

https://www.shure.co.jp/products/software/shure_update_utility