One Control / Chamaeleo Tail Loop MKII

It features 4 series loops, 1 separate loop, 5 program loops with tuner out/mute switch and power supply. Its compact size maximizes the usability of your effects board.

■Programmable Switcher
■True Bypass Specifications
■5 Channels x 3 Banks = 15 Memories
■Tuner Out/Mute Switch
■Power Supply: Optional Center Negative 9V Adapter (One Control EPA-2000 recommended). When powering connected effects, consider the capacity of the adapter.
■Dimensions: 440 x 63 x 54mm
~From the Manufacturer's Website~
- 5 Programs x 3 Banks, 15 Memories Available.
- Equipped with 4 Series Loops and 1 Separate Loop.
- Independent Loops Double as Amp Channel Switches.
- Visually Easy Programming.
- Equipped with a Lock Switch to Lock Programs.
- Can be used as a Normal Switcher by Using Direct Mode.
- Tuner Footswitch Can Also Be Used as a Mute Switch.
- Equipped with a Very Natural BJF Buffer Circuit.
- Equipped with Buffered Input, Non-Buffered Input, and Buffered Output.

■Program Mode and Direct Mode
The Chamaeleo Tail Loop MKII features Program Mode and Direct Mode. You can switch between Program Mode and Direct Mode by holding down the BANK switch for more than two seconds. You can instantly check your sound or turn individual pedals on and off at any time.

■Lock Switch
A slide switch locks the presets you've carefully set, preventing them from being accidentally changed by pressing a button while playing.

■Cycle-Select Bank Select
We strive to be as compact as possible, pursuing functionality without sacrificing ease of use. For example, while the more presets you can store, the better, but selecting them is pointless if it becomes too complicated. The Chamaeleo Tail Loop MKII maintains its compact design by using a single footswitch for bank selection. To increase the number of presets, we've adopted a three-color LED cycle-select system, allowing you to select three banks with one footswitch. Each press of the footswitch changes the bank from GREEN, RED, BLUE, GREEN, and so on. It is possible to add more banks, but doing so would make bank selection more complicated, so we have set it to three banks, which provides the best balance.
■Series Loop and Separate Loop
A series loop is multiple effect loops connected in series. While this allows for the shortest signal path, it can only be used in series.
In addition to four series loops, the Chamaeleo Tail Loop MKII is also equipped with a separate loop. Since the separate loop operates as an independent loop, you can connect effects before the amplifier and within the loop, or before the input buffer, and even connect effects on completely separate paths, such as to another part. These can all be controlled by a program, allowing for flexible operation.