audio technica / DH-01

This headphone amplifier is recommended for drummers. Two stereo inputs allow you to monitor PA monitors and click sounds simultaneously. It can be powered by an AC adapter or a 9V battery.

■Headphone Amplifier
■Headphone amplifier with two stereo inputs (※1).
■Two-way power supply: AC adapter or battery powered.
■Includes a PAN knob that can be used in mono mode.
■Equipped with a screw hole for connecting to an L-shaped rod (※2).
(※1) Two inputs: XLR connectors (L IN, R IN) and a φ3.5mm stereo mini jack (AUX IN).
(※2) Can be incorporated into a drum set using the separately sold TAMA ""LRW"" and clamp. (As of April 2010)

Specifications
■ Maximum Output: 160mW + 160mW (32Ω load, THD=10%)
■ Frequency Response: 20-20kHz (-3dB)
■ Total Harmonic Distortion: Less than 0.1% (1kHz, 32Ω load, 30mW output)
■ Signal-to-Noise Ratio: More than 82dB (S=1Vrms, JIS-A)
■ Power Supply:
- AC Adapter (DV9V, 300mA or more)
- Battery: 006P/9V, 6F22/9V, 6LR61/9V
■ Current Consumption: 67mA (32Ω load, 30mW output)
■Battery Life:
- Alkaline batteries (approximately 12 hours continuous use at 10mW output)
- Manganese batteries: approximately 5 hours continuous use (at 10mW output)
■Input Terminals:
- XLR connector (L IN, RIN)
- 3.5mm stereo mini jack (AUX IN)
■Output Terminals
- 6.3mm stereo standard jack (PHONES)
- 3.5mm stereo mini jack (PHONES)
■Dimensions: H42 x W126 x D85mm (excluding protrusions)
■Weight: Approximately 440g