CARVIN / V3 LED Polished Stainless Steel Grill Edition Black

This special version features flashy LED lighting and a mysteriously shining stainless steel grille! It features three channels: two drive channels boasting overwhelming sustain and deep low frequencies, and a clean channel with pure, sparkling tone. It also features MIDI control, allowing you to control not only channel switching but also volume boost and effect loop on/off via MIDI. This is the ultimate all-tube amp head with limitless possibilities.

■Guitar Amp Head
■Output: 100W/50W switchable
■Vacuum Tubes: 12AX7 x 5, EL34 x 4
■3 Independent Channels
■Drive Channel with Earth-Shaking Deep Bass and Incredible Sustain
■Drive Channel Features 3 Character Switches
・""INTENSE"" The hardest distortion. Powerful deep bass and a smooth, clear sound.
・""CLASSIC"" Classic overdrive with sharp response.
・""THICKNESS"" Distortion with detailed midrange and brilliant highs.
■Clean Channel with Pure, Sparkling Tone
■Powerful, Independent 3-Band Tone Controls for Each Channel
■The Master Section Features Deep, Mid Cut, Bright, and Boost Controls for Adding Depth and Edge to Your Sound. The Boost Control, which brings out the Lead Sound, can be turned on/off with a separately sold footswitch.
■Two effect loops for flexible configuration with the ""Smart Loop"" feature.

- For example, you can turn off the loop on Channel 1, assign Loop 1 only to Channel 2, or assign both loops to Channel 3.

Supports MIDI channel switching.

Dimensions and Weight: 64.5W x 27H x 24D cm, 15.7kg

MADE IN USA

Independent control of three channels allows you to achieve a wide range of sounds, from pure, sparkling tube clean tones, to bitey crunch, to loud sounds that can become a wall of sound. Additionally, each channel can be configured with three different gain characteristics and the EQX expanded tone circuit, allowing for endless configurations.

MIDI compatibility allows you to switch between channels, as well as save and recall volume boost and FX loop on/off settings with a single action.

In addition to the standard equalizer, it also features three master equalizers: Deep, Mid-Cut, and Bright. Unlike the equalizers found on typical guitar amps, these controls act directly on the power amp output, allowing for dynamic and aggressive sound shaping.
■The tail switch on the rear panel turns off only the send signal, allowing the reverb and delay to decay naturally. Unlike previous amps, you'll no longer have to worry about the effect sound cutting off as soon as you turn off the FX loop.