Let's set up our karaoke equipment

When installing karaoke equipment, the first thing to choose is the amplifier. You can use an amplifier that is used in general live events, but in that case, you will need a separate mixer and effector, and you will be troubled by the various connections of the equipment. For full-fledged sound quality, it is recommended to use a combination of various equipment, but if you want to avoid the hassles and just enjoy karaoke, an easy karaoke amplifier is recommended. We will introduce the karaoke amplifier that Sound House sells.

After choosing an amplifier, next is the speakers. It is essential to choose the best speakers to get the best performance from your amp. If you make a mistake, you may damage the equipment. Now we will introduce the selection method.

[Reference]How to choose speakers and a power amplifier

We will also introduce the speakers that Sound House recommends.

Microphones can be broadly divided into condenser microphones and dynamic microphones. Unlike speakers and amplifiers, you can easily replace them, so you can try many microphones and enjoy the difference in sound quality.

Dynamic microphones

A general microphone used in live performances, by moderators, for karaoke, etc., and is characterized by its durability, resistance to feedback and handling noise.

Condenser microphones

Compared to dynamic microphones, they have a clear high-frequency response and can capture subtle sounds more sensitively. On the other hand, there is also a demerit, as the sensitivity is high, so they are prone to feedback, and they pick up detailed noise. Therefore, they are often used for recording applications. Also, because they are susceptible to shock and humidity, care must be taken in handling and storage. If used, phantom power must also be supplied.

What is phantom power?

The electricity supplied from the mixer to the microphone. By turning on the switch on the mixer side, a constant voltage is supplied to the microphone. Since the voltage that can be supplied differs depending on the mixer, it is necessary to check the voltage corresponding to the microphone used.