RADIAL / Headbone VT

The Headbone VT amp switcher is a must-have for guitarists who love tube amp sound. It allows you to use two tube amp heads with one speaker. It offers a wide selection of Fender clean and Marshal drive options, allowing you to customize your sound to your liking. It also features buffered and direct inputs.

■Switch between two amp heads by connecting them to one cabinet
Headbone is a switcher that connects two amp heads to one cabinet and switches between them. You can use a Marshall for rhythm guitar and a Mesa/Boogie for solos. You'll deliver the best performance on stage and in the studio.

■Superior sound quality with Class A circuitry
This unit boasts exceptional sound quality thanks to its 100% discrete Class A circuitry, and transformer isolation eliminates ground loop issues. The relay circuit, which combines an optocoupler and a load resistor, is digitally controlled for switching.


■Safely switch between two amp heads
With the press of a switch, the guitar signal is instantly switched to the other amp head, disconnecting the original head's speaker and connecting it to the load resistor, reconnecting the other head to the speaker, and then outputting the guitar sound. In the unlikely event that the unit loses power, a safe mode is activated that automatically disconnects the guitar input.

■ Remote control with an external footswitch
To reduce cable clutter on stage, you can also operate the unit with an external remote switch (sold separately). In addition to a standard footswitch, it can also be controlled with a MIDI switching system. This allows you to set up a system using short speaker cables.
A latching footswitch with a 1/4-inch TS phone jack can be used.

■ Two types of input: buffered or direct
If you are connecting a buffered device before this unit, use the direct input. If you are connecting a guitar directly, we recommend the buffered input. The unit's buffer circuit prevents noise and signal degradation.

■ Power supply: DC15V center-positive adapter (included)