Binary Acoustics / DYNAQUATTROJPVer

Binary Acoustics’ “DYNAQUATTRO JP Ver.” is an IEM featuring a multi-dynamic-driver configuration, with four dynamic drivers per side.

■ Dynamic drivers arranged to bring out the characteristics of each
- A driver with a pure aluminum diaphragm for the high range and a textureless cermet diaphragm for the mid range was selected. For low frequencies, a 3-way crossover controls the placement of the right materials in the right places, including a combination of a powerful driver with a 10mm dual diaphragm dual magnet structure and a 6mm wool paper cone diaphragm.

■ Dynamic drivers arranged to bring out the characteristics of each
- A driver with a pure aluminum diaphragm for the high range and a textureless cermet diaphragm for the mid range was selected. For low frequencies, a 3-way crossover controls the placement of the right materials in the right places, including a combination of a powerful driver with a 10mm dual diaphragm dual magnet structure and a 6mm wool paper cone diaphragm.
■ 3WAY crossover
- Equipped with a 3WAY crossover to control all drivers. The Klippel system thoroughly analyzes diaphragm vibration and uses a unique simulation to control the four drivers.
■ Cavity integrated molding
・In order to accurately match the sound waves from each driver, the shell and cavity are integrally molded.
■ Uses GeekWold's Japanese domestic Litz cable for Japanese specifications.
- For Japan, a high-quality cable using Japanese domestic Litz cable is bundled. Bring out even deeper sound.

・ Driver: 4DD (10mmDD (equipped with dual diaphragm) + 8mmDD (cermet material diaphragm) + 6.8mmDD (pure aluminum diaphragm) + 6mmDD (wool paper cone diaphragm))
・Frequency characteristics: 20Hz - 20000Hz
・Impedance / Output sound pressure level: 23Ohm / SENSITIVITY: 111dB/Vrms@1kHz
・Connection terminal/plug: Domestic specification is only 4.4mm
・Cable specifications: Japanese Litz cable + silver coated Litz hybrid cable