IMAGENICS / CRO-HRS1

<> This is a frame synchronizer that complies with HDMI2.0/1.4 and HDCP2.2/1.4 standards.

■4K HDMI Frame Synchronizer
■Input HDMI Signal
TMDS signal (digital RGB/YPbPr) pixel clock 25MHz to 600MHz (TMDS clock 25MHz to 340MHz)
Automatically supports 4K, D1 to D5 equivalent HDMI signals and PC signals from 640x480 to 4,096x2,160
Supports HDMI signals up to 36-bit deep color signals and HDR10 signals with data rates up to 18Gbps
HDMI Input Terminal: 1 HDMI-A 19-pin connector (HDMI 1.4, 2.0, HDCP 1.4, 2.2 compatible, DVI signal input possible)
■Input Cable Cable coverage:
Videos up to 6 Gbps, such as PC (VESA) and D5, up to 30 m (using the Imagenics HDP-HDP 30m HDMI cable)
Videos up to 10.2 Gbps, such as 4K30, 60 (420), up to 20 m (using the Imagenics HDP-HDP 20m HDMI cable)
Videos up to 18 Gbps, such as 4K60 (422, 444), up to 10 m (using the Imagenics HDP-HDP 10m HDMI cable)
(This applies to signals output from specified Imagenics products. This does not include signals output from consumer/household devices or products from other companies.)
■Output HDMI signal
HDMI 1.4, 2.2 Standards-compliant (HDR compatible, HDCP 1.4, 2.0 compatible) or DVI 1.0 standard-compliant signal (HDCP 1.4 compatible).
HDMI output resolution can be automatically set using acquired EDID or manually set. Default vertical resolution is 59.94Hz.
8-bit/C or 10-bit/C conversion output of RGB.L, RGB.F, YUV444, YUV422, and YUV420 (4K60 only) is possible.
4,096x2,160, 3,840x2,160 (4K), 2,560x1,600, 2,560x1,440, 2,048x1,152, 1,920x1,200, 1,920x1,080 (D5), 192 0x1, 080i(D3), 1, 680x1, 050, 1, 600x1, 200, 1, 600x900, 1, 440x900, 1, 4 00x1, 050, 1, 366x768, 1, 360x768, 1, 280x1, 024, 1, 280x800, 1, 280x768,
1, 280x720(D4), 1 , 024x768, 800x600, 720x480 (D2:16:9), 720x480 (D2:4:3), 720x480i (D1:16:9), 720x480i (D1:4:3), 640x480
■ Delay Time:
Normal HDMI video delay is 2-3 frames of the output video frame cycle (approximately 34 ms to 50 ms).
When using the input frame lock function, the delay is fixed at approximately 1 frame (approximately 17 ms).
The input frame lock function is effective for matching video delay in multi-screen system configurations.
When using 90-degree rotation, one frame (approximately 17 ms) is added.
Audio delay is fixed at 42 ms for 2-channel stereo audio only.
Other audio formats (including multi-channel PCM, compressed, and HBR audio) use active pass-through (latency of less than 1 ms).
■Analog Embedded/De-Embedded Audio Input/Output Signals
Analog Input Audio Signal: -10 dBu, approximately 47 kΩ, unbalanced, 2 channels, 1 system, RCA terminal x 2 (when embedded)

Analog Output Audio Signal: -10 dBu, low impedance, unbalanced, 2 channels, 1 system, RCA terminal x 2 (when de-embedded)
*Analog audio embedding and de-embedding functions are selected using DIP-SW position 2. CH-1 (L) and CH-2 (R) only.
*De-embedding is only available when HDMI audio is in linear PCM format; compressed audio cannot be de-embedded.
■Built-in EDID Emulation:
You can select whether to use the output HDMI terminal or 15 built-in resolution data from the unit using the EDIDROT-SW or external control.
■External control:
10BASET-T, 100BASE-TX (automatic judgment) RJ451 system.
(The factory default address is IP:192.168.2.222PORT:01300.)
■Other Features:
Input and output HDMI signal status displayed on two-color LEDs, built-in test pattern and tone generation
On-screen information display, automatic conversion from 4K HDR video to SDR video
Crop and enlarge video from any position in 0.01% increments (multi-screen compatible)
Reduce video to any size, flip video horizontally or vertically, rotate video in 90-degree increments
Trim output video, freeze, black, fade, and flick seamless transitions
Specify output HDMI signal color system (external control only), turn HDMI output on/off from external control
Frame lock output video to input HDMI video (for multi-screen configurations)
Offset output vertical frequency in 0.01Hz increments, on-screen overheat warning display, and more. ■Power Supply/Power Consumption: DC5V 1.8A/9W
■Size: 100(W) x 25(H) x 150(D) mm (excluding protrusions) / Approx. 550g
■Accessories:
1 AC 100V 27VA 50Hz/60Hz AC adapter for Japan (5V 4A output with lock)
2 HDMI Locking Brackets (CL-2)
""