MOOER / Macro Power S8 Isolated Power Supply

The Macro Power S8 Isolated Power Supply is a power supply that can supply 9V DC power from eight center-negative outputs. [LF] Three of the 200mA DC outputs, including three selectable 9, 12, 15, or 18V DC outputs, are independent, while the remaining four 9V DC outputs are paralleled, allowing for a total current supply of up to 400mA.

By using both independent and parallel outputs, you can power a system combining digital and analog pedals without noise.

The independent terminals allow simultaneous use without interruption even if a problem occurs with one of the outputs. Each system is equipped with a protection circuit that automatically turns off the LED and stops supplying power if the current supplied to the effect exceeds the output.

All outputs are center negative. A polarity conversion cable is included for use with center positive effects pedals.

●Features

- Power supply with a total output of 1200mA
- Eight independent power supply jacks for five systems
- Equipped with a protection circuit that activates when the current supply exceeds the limit
- Blue LEDs on each terminal indicate the status

●How to Use

For effects pedals powered by a center negative DC9V connector, connect the included DC power cable directly to the effects pedal.

For effects pedals that draw more than 200mA, connect to the 400mA terminal. Not compatible with effects pedals that draw more than 400mA.

For effects pedals that use a center-positive DC9V, connect the included DC cable and polarity conversion cable.

For effects pedals that run on 12V, 15V, or 18V instead of 9V, connect to the Adjustable Voltage Output. The maximum current draw for connected effects pedals is 200mA. First select the voltage with the switch before connecting.

Before connecting, be sure to check the voltage, current draw, and polarity of the device you're connecting to, and confirm that it can be connected to Macro Power.

●Accessories
Power Cable
460mm DC Cable x 4
610mm DC Cable x 4
200mm Reverse Polarity Cable x 2
Velcro Tape

●Specifications
Output: 4 x 9VDC Outputs (Independent / 200mA each / One of which is adjustable to 9, 12, 15, or 18V), 4 x 9VDC Outputs (Max. 400mA Total)
Dimensions: 165mm (D) x 83mm (W) x 52mm (H)
Weight: 1.12kg