CIOKS / Split Flex 1035

Variations

<> Split Flex allows you to connect two pedals to a power source using just one outlet. Two cables, one 30cm long and one 50cm long, connect to the power supply's plug. The other end terminates in the most common type: a 5.5/2.1mm center-negative angled DC plug. Both pedals connected to the power supply are powered by the same voltage and are not isolated from each other.

Split Flex is like a 2-way Daisy Chain. Make sure the combined current draw of the two pedals does not exceed the power outlet rating. We recommend using Split Flex with two primarily analog, low-current pedals and a 100mA outlet. Using Split Flex with two digital pedals, or one analog and one digital pedal, may introduce unwanted noise into the signal. If you want to power three pedals from the same voltage on a single outlet, check out the CIOKS 3-Way Daisy Chain Flex.

■SPECS
Split Flex 1035 - Two 5.5/2.1mm center-negative DC plugs, 30 & 50cm / 12"" & 20"" (black)