CIOKS / 3-way daisy chain Flex 1533

<> This flex cable allows you to power three pedals from a single power supply outlet.

Make sure all three pedals are powered by the same voltage and use the most common 5.5/2.1mm center-negative DC plugs. In this daisy chain, the first DC plug is 50cm away from the plug that connects to the power supply's outlet. There is also a 30cm distance between the first and second DC plugs, and between the second and third DC plugs. The total length of this special flex cable is approximately 110cm. The longer the distance between the plugs, the more flexible the placement of daisy-chained pedals on your pedalboard.

When using Daisy Chain Flex, make sure the total current (mA) of all three pedals is below the maximum current rating of the outlet you're using. Also, note that on the Daisy Chain Flex cable, all three DC plugs are connected in parallel to the power outlet. To avoid noise issues, use Daisy Chain Flex only with analog pedals. This avoids the risk of digital pedals introducing noise into your guitar signal when powering simple analog pedals in parallel.

If you want to power two pedals with 5.5/2.1mm center-negative DC plugs from a single outlet, consider the CIOKS Split Flex. If you have two pedals with the same voltage but different plug shapes, consider the Split Adapter Flex.

■SPECS
3-way daisy chain Flex 1533 - three 5.5/2.1mm center-negative DC plugs, 50+30+30cm / 20""+12""+12"" (black)