CIOKS / Parallel adapter Flex 8800

<> The Parallel adapter Flex 8800 uses two isolated outlets, allowing you to obtain the maximum combined current of the two isolated outlets you use.

This adapter cable is used in conjunction with a CIOKS standard Flex cable when you need to power a pedal that requires a high current. Not only does it provide high current, but it also allows you to choose the type of plug on the pedal and the length of the cable you need. The plug type and length are determined by the standard Flex cable you use with the adapter.

Please note that the two outlets you use are connected in parallel. These two outlets must be isolated from each other and have the same voltage and, preferably, the same rated current. The sum of the maximum rated current and voltage will be the same as the two outlets you use. If you use two 9V outlets with a rated current of 100mA each, you will still get 9V, but the maximum current will double to 200mA. If you use two 9V outlets with a rated current of 200mA, you will get 9V and a maximum of 400mA. If you have two 400mA outlets, you will get a total maximum current of 800mA.

■SPECS
CIOKS Parallel adapter Flex 8800 - 10cm / 4"" (sand grey)