KarDiaN / Crotonin "ADD CBF"

<> A clean low-pass filter that does more than just enhance the original sound. A special modification to the pedal adds Clean Blend & Clean LPF, which was specially created for a musician who ordered it, and is now finally available as an official product.

By blending a high-quality clean booster into the effects section, you can adjust the attenuation of the original sound that occurs when passing through the effects. Additionally, by adjusting the LPF on the clean side (a mechanism that cuts highs and passes lows), you can blend in only the low-frequency components of the original sound. The low frequencies, which control pitch and the core of the sound, can be created with the clean original sound, while the mid- to high-frequency components that best suit the effect can be created with the original effect sound. The unique feature of the ""ADD CBF"" module is that the LPF allows optimal sound communication without masking each other.

KarDiaN's new sound blending with Crotonin and ADD CBF musically adds original sound components that were previously lost when using effects.

■SPECS
- Input Impedance: 1M
- Output Impedance: 10kΩ
- Controls: Volume, Drive, Treble, Bass
- Side Controls: Blend, Clean-LPF, Clean-Vol
- Switching Method: True Bypass
- Connectors: Two standard 1/4-inch phone jacks (input, output)
- Power Supply: 9V center negative DC power supply (battery-operated 9V type 006P)
- Current Draw: 16mA
- Dimensions: Width (W) 72 mm, Depth (D) 121 mm, Height (H) 55 mm (including protrusions such as footswitch and jack)
- Weight: 318g
- JAN: 4589825520710
- Accessories: Warranty Card

■DISCLAIMER
Specifications are subject to change without notice due to product improvements. Images are samples. Please note that the paint finish varies slightly from unit to unit. The metal plate may have scratches due to manufacturing reasons; however, this is a natural result of the processing process. Due to the design of the metal knob, touch noise will occur only when the knob is operated. We recommend operating the knob with the string grounded (your finger touching the string).