JHS Pedals / Volture

The JHS Pedals Volture reproduces the characteristic gate and split noise of a vintage fuzz pedal when the battery is about to die. Connected between the power supply and the pedal, the Volture lets you adjust the output voltage (1.25V to 7.5V) with a single knob. This adds unpredictable harmonic texture to the tone of analog pedals (fuzz, overdrive, etc.), eliminating the dilemma of never being able to get the same sound twice.

[直輸入品][Direct Import]

■Features
- Variable Voltage Sag
- Adjust the voltage supplied to the pedal from 7.5VDC down to a minimum of 1.25VDC by turning the knob, simulating the condition of a dead battery.
- Wide Power Compatible
- Accepts inputs from -9VDC to 18VDC (output voltage is adjusted).
- Analog Only
- Compatible with all analog pedals.
- Warning: Do not use with digital pedals.
- Visual Feedback
- The LED dims as the voltage drops, allowing you to visually check the voltage status.

■Specifications
- Power Supply: 9V DC (center negative)
- Input Voltage Range: 9V DC to 18V DC
- Output Voltage Range: 1.25V DC to 7.5V DC (adjustable)
- Current Draw: 12mA (in addition to the current draw of the connected pedal)
- Controls: Voltage (voltage adjustment knob), Bypass switch
- Input/Output: 1/4-inch DC jack (INPUT POWER, OUTPUT POWER)

Dimensions: 9.1cm x 3.8cm x 2.54cm