PMC / PMC6-2

The PMC/PMC6-2 is a near/mid-field monitor suitable for installation in control rooms and immersive systems.

The PMC 6-2's scale, depth, and dynamics will improve your mixing workflow, increasing efficiency and confidence, while helping you work stress-free.

The PMC 6-2 is a 3-way active monitor speaker that combines two custom 6"" extra-long-throw bass drivers, a 2"" soft-dome PMC55 midrange unit, and a precision-crafted 1"" soft-dome tweeter.

The PMC55's signature N-compass waveguide improves the driver's dispersion and mid-frequency projection. This, combined with the tweeter's high performance, delivers a wide, stable sound image with smooth, comfortable response.

A state-of-the-art 400W Class-D amplifier drives each bass driver individually, and they are seamlessly linked using PMC's precision DSP-based crossover.

The PMC 6-2 offers excellent value for money, delivering superior low-frequency extension and stable frequency response unaffected by volume changes thanks to its ATL® bass loading technology. PMC's Laminair® airflow technology, using hexagonal vents, reduces sound coloration and enhances dynamics.

Calibration
As with the PMC 6, calibration can be performed using the controls on the rear panel or SoundAlign® software, accessible via a browser.

Upgrade to an XBD System for Extended Low End
Upgrade to a full-range XBD system by adding a PMC 8.2 SUB. Enabling the ""XBD"" DSP mode allows the two units to work together perfectly, delivering clean low frequencies down to 25 Hz.

Product Features
- Active 3-way nearfield reference monitor with ATL? bass loading
- State-of-the-art Class-D amplifiers: HF 400W, LF 400W
- Analog/AES3 digital input (16/24-bit, 18-192kHz sample rate)
- Digital ""Through"" output (AES3 24-bit 96kHz)
- SoundAlign? network control interface for setting and EQ control (single and group)
- Sophisticated DSP for crossover, driver protection, EQ, delay/phase settings
- Expandable to ""PMC6-2 XBD"" with PMC6-2 + PMC8-2 SUB for low-frequency response down to 25Hz
- Optional mounting brackets allow for suspended installation in multi-channel and immersive systems

Product Specifications
Type: Active 3-way nearfield reference monitor with ATL? bass loading

Driver Unit Complement:
　LF 2 x PMC 150mm (6”) studio 6 drivers
MF PMC 55mm (2”) soft dome mid-range
　HF PMC 27mm (1”) soft dome tweeter

Effective ATL? Length: 2m (6.6ft)

Frequency Response: 33Hz - 25kHz (- 3dB) (@1m full space, on-axis)

Sensitivity: +4dBu input signal = 98dB SPL @ 1m

Max continuous SPL: 109dB @1m
(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL: 121dB @1m
(Half space value as +3dB from full space calculated measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Directivity:
　H +/-50 degrees
　V +60/-40 degrees (-6dB off axis @10kHz)

Input: XLR switchable between analogue & digital AES3

Analogue input
- +20/+24dBu max. input level (selectable)
-22K ohm input impedance

Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate
-110 ohm input impedance

Expansion card slot
-For future connectivity upgrades

Output: XLR digital AES3 (fixed 24-bit @ 96kHz)

Network : RJ45 for use with PMC SoundAlign web interface

Features: Level Trim (+/-10dB)
　High-pass filter (20 - 200Hz, 12dB/Oct)
　Delay (0 - 30mS) Phase (normal or inverted
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
　User presets (3 + factory defaults)

Latency: 2.4mS

Amplifier Power per Channel:
LF 2 x 400Wrms
　MF 1 x 400Wrms
　HF 1 x 400Wrms

Mains : 100 - 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle): 50W

Power consumption (max): 1500W

Dimensions:
　H 400mm (15.7”)
　W 430mm (16.9”)
　D 372mm (14.6”)

Weight: 21.3kg (47lbs) each