One Control / Minimal Series MIDI Input Selector

The One Control Minimal Series MIDI Input Selector is an input selector that lets you switch between two guitars, a stereo synthesizer, or other devices. It features full stereo input and output. The signal line operates passively with true bypass, so you can also use it as a stereo AB box by connecting it in reverse.

■ KEY FEATURES
- Switch instrument inputs via MIDI or footswitch.
- Can be used as an AB box by using the footswitch in reverse.
- Stereo/mono compatible, with two footswitch modes.

■ Footswitch Mode
Standard mode: The input terminal changes each time the footswitch is pressed. (LED red)
Flash mode: The input terminal changes while the footswitch is pressed. (LED white)

■ Switching Footswitch Mode
- Switching from Standard to Flash Mode
1. Turn on the MIDI Input Selector and select the input that will be used when the footswitch is not pressed in Flash mode.
2. Turn off the power. (Disconnect the adapter.)
3. While holding down the footswitch, connect the adapter, press the footswitch so the LED turns white, then press and hold the footswitch.
- Switching from Flash Mode to Standard Mode
1. Turn off the power. (Remove the adapter.)
2. While holding down the footswitch, connect the adapter, press the footswitch, and when the LED turns red, press and hold the footswitch.

■MIDI Control
MIDI Channel: Use the DIP switch on the side to change the receiving MIDI channel.
MIDI PC: PC#0 selects Input A, and PC#1 selects Input B.
MIDI CC: CC#102 values ​​0-63 select Input A, and values ​​64-127 select Input B.

*MIDI PC and CC numbers range from 0-127. In particular, the MIDI PC number may operate between 1-128 depending on the model. In that case, increase the number by one.

*When power is connected, the LED will flash the number of times corresponding to the currently set MIDI channel.

■Specifications
Current Consumption: 60mA
Size: 35 x 48 x 98mm
Weight: 127g