STRYMON / PCH

＜＜Sep 2025 New Product！＞＞ The PCH is an ultra-premium stereo active direct interface with a built-in console-grade headphone amplifier. The sound of your pedalboard will not change at all after passing through the PCH. With the built-in headphone amplifier, you don't need to ask someone to confirm your sound. You'll definitely hear the difference.

- 2-channel design - can be used in stereo or dual mono
- Operates on 9VDC - internally boosted to 24V, eliminating signal clipping
- Powerful headphone amplifier capable of driving high-impedance headphones
- XLR output switchable between mic and line level
- XLR output ground lift can be disabled
- Sum output can be disabled for Thru output
- Internal power supply uses a custom galvanically isolated transformer to prevent electric shock and ground loops
- PCH uses a modified Ojai power supply design
- Flat frequency response
- Extremely low THD (total harmonic distortion)
- Tour-worthy construction with a 3mm thick aluminum exterior and 5mm ribs on the shell
- Protects the headphone volume pot while allowing easy jack access
- High-quality, long-life jacks and switches

Product Specifications
■ Input
Input Impedance: 1 Meg Ohm
Maximum Input Level: +20 dBu
■ Thru
Output Impedance: 100 Ohm
SNR: +135dB (A-weighted)
Noise Floor: -115dBV (10-22kHz, non-A-weighted)
Gain relative to input: +0dB
Frequency Response: +/- 0.25dB, 10Hz - 80kHz+
■XLR Output (MIC Setting)
Output Impedance: 100 Ω
Gain relative to input: -20dB
Maximum Output Level: +0.0dBu
SNR: +125dB
Noise Floor: -125 dBV (10-22kHz, non-A-weighted)
Frequency Response: +/- 0.25dB, 10Hz - 80kHz+
■Headphones
Output Impedance: 2 Ohm
Frequency Response: +/- 0.25dB, 10Hz - 80kHz
■XLR Output (LINE Setting)
Output Impedance: 275 Ohm
SNR: +130dB (A-weighted)
Noise Floor: -110dBV (10-22kHz, non-A-weighted)
Gain relative to input: +0dB
Maximum output level: +20dBu
Frequency response: +/- 0.25dB, 10Hz - 80kHz+
Other
Input voltage: 9VDC center negative, 500mA
Dimensions: 133mm (W) x 90mm (H) x 48mm (H)
Lightweight, rugged anodized aluminum chassis
Designed and built in the USA