CLASSIC PRO / CWP800L

This set includes a plug-in receiver, transmitter, and lavalier microphone. Both the transmitter and receiver are equipped with built-in lithium-ion batteries, allowing use even in locations without a power supply. An ideal solution for speeches and presentations.

Specifications

Transmitter

Transmission Frequency: B Band

Preset Channels: 30 (auto-scan system) *Note 1

RF Output Power: 10 mW

Oscillation Method: PLL synthesizer

Frequency Stability: ±0.005%

Maximum Deviation: ±20 kHz

T.H.D.: < 1% (at 1 kHz)

Tone Frequency: 32.768 kHz

Current Consumption: 150 mA ± 10 mA / 3.7 V

Output Impedance: 1 kΩ

Display: TFT (displays channel, volume, RF level, and battery status)

Channel Selection: Via sync with receiver

Compatible Receivers: CWP800R, CW801R, CW802R

Power Supply: Built-in lithium-ion battery (1000 mAh)

Charging Port: USB-C

Operating Time: Up to 7–8 hours (depending on conditions)

Charging Time: 3.5–4 hours

Included Accessories: Receiver, transmitter, lavalier microphone, windscreen, tie clip, 2 × charging cables (USB-A to USB-C)

Note 1: Manual channel selection is not available.

Receiver

Receiving Frequency: UHF 806.125–809.750 MHz

Preset Channels: 30

Oscillation Method: PLL frequency synthesizer

Dynamic Range: >98 dB

Output: Unbalanced (0.335 V / 20 kHz)

Battery: 1000 mAh lithium-ion

Spurious Response: ≥60 dB

Current Consumption: 150 mA ± 10 mA / 3.7 V

Dimensions: 123.7 × 24.4 × 45 mm (W × H × D)

Weight: 71.5 g

Transmitter

Operating Frequency: UHF 806.125–809.750 MHz

Channel Selection: Paired with receiver

RF Output Power: 10 mW (max.)

Frequency Stability: ±0.005%

Spurious Emissions: ≥60 dB

Gain Settings: L (-3 dB), 0 (0 dB), H (+3 dB)

Battery: 1000 mAh lithium-ion

Water Resistance: Equivalent to IPX4

Current Consumption: 100 mA ± 10 mA / 3.7 V

Dimensions: 90.4 × 37.2 × 45 mm (W × H × D)

Weight: 79 g

Compatibility:
Also compatible with CWS800 Series receivers.