Limetone Audio / moonlight

Limetone Audio presents a new concept reverb that faithfully reproduces the dynamics and response of the input signal.

A typical digital reverb converts the input signal internally, adds the reverb sound, and then converts it back to an analog signal for output.

Limetone Audio's moonlight handles the input dry signal as an analog signal, and then uses a high-quality internal mixer circuit to analog-mix the digitally generated reverb sound before outputting it. This allows the output to retain the original sound's tonal quality and nuances.

Even when combined with a distortion effect, the nuances created by the distortion effect are conveyed intact, allowing for sound shaping with minimal distortion.

You can choose from spring, room, or hall reverb tones.

The decay knob adjusts the volume and duration of the reverb. The reverb tone knob allows for a wide range of sound creation, from natural and subtle to creative, brighter tones.

It also features a master knob, which can be turned ON to boost or cut the overall volume. In situations where you want to turn on reverb and booster at the same time, you can achieve this with just one moonlight. It can also be used as a booster by setting the reverb level to zero.

■Features
- The original sound is not converted to digital, but is output as analog via a high-quality mixer circuit.

(Delay pedal: Same specifications as Buddy)
- Equipped with a master knob, allowing you to boost or cut the overall volume.

(Delay pedal: Same specifications as Buddy)
- Tone can be selected from spring, room, and hall.
- The reverb tone knob adjusts the brightness of the reverb sound from a matte, natural sound to a bright, sparkling sound.
- Simple operation that is easy to understand even for beginners.

■SPECS
Connections: INPUT, OUTPUT, DC9V In
Accessories: Instruction manual, warranty card
Dimensions: Width (W) 65 mm, Depth (D) 110 mm, Height (H) 52 mm
Weight: 253 g
Input Impedance: 1 MΩ
Output Impedance: Less than 12.5 kΩ
Current Consumption: 80 mA