EARTHQUAKER DEVICES / Four to One Mixer

Our to One Mixer is a compact, easy-to-use 4-channel mixer with a phase switch and output adjustment knob. The input buffer is set to 1 MOhm and the output buffer is set to 100 Ohm, providing high headroom. It's perfect for guitars, basses, synths, drum machines, and anything else that can be input to this mixer!

Even when using long cables, the signals input to each channel are mixed and output cleanly and without distortion, without having to worry about changes in the input signal.

This Four to One Mixer was developed with the simultaneous release of the One to Four Splitter in mind, but the Four to One Mixer can also be used by a variety of artists in a variety of ways on its own.

■Controls
Phase: Changes the phase of the output signal. The outputs of pedals and other instruments are not necessarily designed to be output with the same phase. If you experience problems such as a thin sound when mixing the signals input to the Four to One Mixer, try inverting the phase using the Phase switch. Normally, the ""+"" setting will not cause any problems, but if you notice any changes in sound like those described above, set it to the ""-"" side and check the sound change.
Level: Sets the output voltage of the input signal.

■Tech Specs
Dimensions: 121 x 64 x 57 mm
Current Draw: 50 mA
Input Impedance: 1 Ω
Output Impedance: 100 Ω
Power
This product is compatible with a 9V, 2.1mm center-negative AC adapter. Daisy-chaining or using non-transformer power adapters may result in noise, so we do not recommend using them with power supplies above 9V. Do not use power supplies exceeding 9V, as this may cause malfunction.