IMAGENICS / CRO-SHC5

This converter can convert 3G/HD/SD-SDI to any resolution HDMI/DVI signal. It is a converter with scan converter function that automatically converts SMPTE standard SD/HD/3G-SDI signals to HDMI signals.

■SD/HD/3G-SDI to HDMI Converter (with scanning control)
■SDI Input:
One digital serial signal compliant with SMPTE 125M, 292M, 424M, or 425M standards, 0.8Vp-p, 75Ω, BNC x 1
■Input Cable Compensation
3G-SDI pathological signal input: Automatic compensation up to 100m with 5CFB-equivalent coaxial cable

HD-SDI pathological signal input: Automatic compensation up to 150m with 5CFB-equivalent coaxial cable

SD-SDI pathological signal input: Automatic compensation up to 250m with 5C2V-equivalent coaxial cable
■Active Through Output:
Digital serial signal via active through of the above signals 1 x 0.8Vp-p 75Ω BNC
■HDMI/DVI Output:
TMDS signal (digital RGB, YPbPr) 1 x HDMI-A connector (DVI signal output possible)
20-bit YPbPr 422 HDMI standard compliant signal (including 2-channel embedded audio) or 24-bit full-color DVI Rev 1.0 standard compliant signal
Automatically converts and outputs resolutions conforming to the CEA-861D or VESA standard obtained via ROT-SW settings or EDID communication (from 640x480 to 2,048x1,152).
For HDMI terminals, output priority is generally D5>D3>D4>D2. Fixed settings are also possible.
■Analog Audio Output: Analog audio output signal: -10dBu (10kΩ or greater load), low impedance unbalanced, 2-channel, 1 system (φ3.5 stereo jack)
Audio frequency response: -1dB to +1dB from 20Hz to 20kHz
Audio S/N ratio: 80dB or greater (A-weighted at 1kHz)
Audio crosstalk: 80dB or greater
Audio distortion: 0.03% or less
Maximum audio output level: +10dBu (SDI embedded audio input at 0dBFS)
Audio sampling: 24-bit, 48kHz linear PCM
■LAN communication function
10BASE-T-T, 100BASE-TX (auto-detection) RJ451 system. (The factory default address is IP:192.168.2.222PORT:01300.)
All network settings can be changed via TELNET connection over LAN communication or via a web browser connection. They can also be reset to their default settings by operating the unit itself.
■External control function:
External control of the unit is possible, including zoom size, crop position, and 90-degree rotation.
■Other functions:
LED display of link status, built-in test pattern/tone generation, on-screen information display, forced output resolution setting, pseudo-seamless operation selection, aspect ratio conversion (maintenance), and more.
■Audio/video absolute delay time:
HDMI video output: 33 ms to 50 ms (equivalent to 2 to 3 fields of output video, +1 field when rotated 90 degrees)
HDMI audio output: Approx. 43 ms (2-channel stereo linear PCM 48k/24-bit)
Analog audio output: Approx. 43 ms (2-channel stereo linear PCM 48k/24-bit)
■Other features:
LED display of input status, built-in test pattern/tone generation, on-screen information display, forced output resolution setting, ultra-high-speed seamless operation selection, aspect ratio conversion (maintaining), and more.
■Power supply: DC5V 1.2A
■Power consumption: 6W (max.)
■Weight: Approx. 550g
■Dimensions: W 100mm x H 25mm x D 150mm (excluding protrusions)

We recommend using only Imagenics DVI/HDMI-related devices and cables. When used in combination with certain products from other companies (including overseas manufacturers), the specified performance may not be maintained, and unexpected malfunctions may occur. In such cases, we may not be able to guarantee the operation of Imagenics products.
""