■4K Video Compatible HDMI Signal Coaxial Extender/Multi-Screen Receiver (with FS Function)
■4K Signal Format
TMDS Clock: 25MHz to 340MHz
Pixel Clock: 25MHz to 600MHz
Data Rate: 0.75 to 18Gbps
HDCP: 1.4/2.2
Supported Resolutions: 4K60p 4:4 (24-bit), 4K60p 4:2 (22-bit), 4K30p 4:4 (24-bit), etc.
■Input Input Signal
Digital serial signal (1x1.0Vp-p, 75Ω, BNC) using original re-encoding method
Video bitrate: 2.5Gbps NRZI signal after original re-encoding
(Constant bitrate, audio: 9.216Mbps) Original bidirectional communication link function
Fully automatic support for IMG.LINK Rev1 standard (uncompressed video) and IMG.LINK Rev2 standard (VC-2HQ video compression).
■Output Signal
TMDS signal (digital RGB, YPbPr (444, 420)) HDMI-A connector (HDCP 1.4, 2.2 compatible, DVI signal output possible)
HDMI 2.0 standard compliant signal (including up to 8 channels of embedded audio) or 24-bit full-color DVI Rev1.0 standard compliant signal
HDMI output resolution can be selected from the following options via external control.
4, 096x2, 160, 3, 840x2, 160(4K), 2, 560x1, 600, 2, 560x1, 440, 2, 048x1, 152,
1, 920x1, 200, 1, 920x1, 080(D5), 1920x1, 080i(D3), 1, 680x1, 050, 1, 600x1, 200, 1, 600x 900,
1, 440x900, 1, 400x1, 050, 1, 366x768, 1, 360x768, 1, 280x1, 024, 1, 280x800, 1, 280x768,
1, 280x720 (D4), 1, 024x768, 800x600, 720x480 (D2:16:9), 720x4 80 (D2:4:3),
720x480i (D1:16:9), 720x480i (D1:4:3), 640x480
Each resolution can be automatically set using the acquired EDID or manually set to a fixed vertical offset of 59.94 Hz.
RGB.L, RGB.F, YUV444, YUV422, and YUV420 (4K60 only) can be converted and output at 8-bit/C.
Digital serial signal (1.0Vp-p, 75Ω, BNC x 1) using a proprietary re-encoding method.
Input IMG.LINK signal is re-clocked and then re-output. IMG.LINK bidirectional communication is also enabled.
*This is not a 4K frame synchronizer output. This is a re-output of the re-clocked input IMG.LINK signal.
Multi-screen configurations are possible by daisy-chaining multiple units with coaxial cables.
■Output HDMI Signal Delay:
Video delay is generally 2 to 3 frames of the output video frame cycle (approximately 34 ms to 50 ms).
When using the input frame lock function, the delay is fixed at approximately 1 frame (approximately 17 ms).
The input frame lock function is effective for adjusting video delay in multi-screen system configurations.
When using 90-degree rotation, one frame (approximately 17 ms) is added.
Audio delay is fixed at 42 ms for 2-channel stereo audio only.
Other audio formats (including multi-channel PCM and compressed audio) use the active pass-through method (delay of 1 ms or less).
■Audio Signal
Analog audio output signal: -10dBu (10kΩ or greater load), low impedance unbalanced, 2-channel, 1 system, RCA terminal x 2
Maximum audio output level: +10dBu (HDMI embedded audio input at 0dBFS)
Audio sampling: 24-bit, 48kHz, linear PCM
■Coaxial transmission distance between transmitter and receiver:
L-7CHD: 210m, L-7CFB: 150m, L-5CFB: 110m, L-5C2V: 60m, L-3CFB: 60m, L-3C2V: 30m
(This distance may be shorter depending on the installation environment. See the specifications for the transmission distance in long reach mode.)
■LAN communication function:
10BASE-T-T, 100BASE-Tx (auto-detection) RJ451 system.
The device is set to operate as a server, receiving external control, by default.
By changing the settings, it can also function as a client, outputting control commands from the IMG.LINK transmitter to connected display devices.
All network settings can be changed via a TELNET connection or a web browser connection via LAN communication.
■External Control Function:
You can control the device by sending commands to it via LAN communication or the communication function from the IMG.LINK transmitter.
External control functions such as zooming, resizing, cropping position, and flipping vertically and horizontally are possible.
You can also control display devices directly from the IMG.LINK transmitter using a crossover cable connected to the device's LAN terminal.
For details, please refer to the instruction manual and the external control instruction manual.
Communication is possible even without video or audio. Also, some restrictions apply when connecting and operating multiple receivers or distributors.
For details, please refer to the instruction manual.
*The CRO-RS22 control app available on the IMG.LINK website is available for use. (Only 90-degree image rotation is not supported.)
■ Other Features:
Fully automatic conversion to 4K or Full HD, aspect ratio conversion, variable zoom,
Multi-screen crop and enlargement, image flip (left/right/up/down), 90- and 180-degree image rotation,
Flick, wipe, freeze, fade, and black pseudo-seamless transitions, output HDMI to DVI signal conversion,
Various memory functions, two-color LED display for output HDMI signal status, HDCP status, and link status,
Built-in test pattern and tone generation, on-screen information display,
IMG.LINK Automatic detection of Rev1, Rev2, and long-reach operation,
Frame lock function for input video or IMG.LINK signal, etc.
■ Power Supply/Power Consumption: DC 5V 1.8A/9W (Max.)
■ Dimensions/Weight:
100mm W x 25mm H x 150mm D (excluding protrusions) / Approx. 550g
■ Accessories:
1 AC 100V 27VA 50Hz/60Hz AC adapter for Japan (5V 2.3A output, with locking mechanism)
1 HDMI connector retainer (CL-1), 1 cable tie
We recommend using only IMAGNIX DVI/HDMI-related devices and cables. Mixing IMAGNIX products with other manufacturers' products (including those from overseas) may result in performance issues and unexpected malfunctions. In such cases, operation of IMAGNIX products may not be guaranteed.
すべてのレビューを見る