IMAGENICS / CRO-URS2A

IMG.LINK (Rev1 and 2) receiver with built-in 4K frame synchronizer.

■4K Video Compatible HDMI Signal Coaxial Extender/Receiver (with FS Function)
■4K Signal Format
TMDS Clock: 25MHz-340MHz
Pixel Clock: 25MHz-600MHz
Data Rate: 0.75-18Gbps
HDCP: 1.4/2.2
Supported Resolutions: 4K60p 4:4:4 24bit, 4K60p 4:2:2 24bit, 4K30p 4:4:4 24-bit, etc.
■Input Signal:

Digital serial signal using original re-encoding method: 1 line, 1.0Vp-p, 75Ω, BNC x 1
Video bitrate after original re-encoding is 2.5Gbps NRZI signal (constant bitrate, audio is 9.216Mbps)
Original bidirectional communication link function,
fully automatic support for IMG.LINK Rev1 standard (uncompressed video) and Rev2 standard (VC-2HQ video compression).
■ Output Signal

TMDS signal (digital RGB, YPbPr (444, 420)): 1 HDMI-A connector (HDCP 1.4, 2.2 compatible, DVI signal output possible)
HDMI 2.0 standard compliant signal (including up to 8 channels of embedded audio) or 24-bit full-color DVI Rev 1.0 standard compliant signal
Output resolution is always automatically converted to 3840x2160@59.94Hz (444/420) or Full HD (444) based on EDID information.
Video Latency: Approximately 33 ms to approximately 50 ms (continuously varies due to frame asynchronous between input and output)
Video latency is less than 2 ms in frame synchronizer-less mode.
Audio Latency: Fixed latency of approximately 42 ms when used with LPCM only; no latency with compressed audio (less than 2 ms bypass).
Audio latency is less than 2 ms in frame synchronizer-less mode.
IMG.Link Active Through Output
Digital serial signal (originally re-encoded) x 1, 1.0Vp-p, 75Ω, BNC x 1
Audio signal