DRY BELL / Vibe Machine V-3

The Vibe Machine V-3 is a top-quality Uni-Vibe type pedal. The analog signal path is designed with discrete transistors just like the classic Uni-Vibe™, but made with miniature electronic SMD technology.

Its compact size makes it ideal for smaller pedalboards.

The Vibe Machine V-3 is one of the world's smallest, greatest-sounding vibe pedals, featuring all the features of the original Uni-Vibe™. It offers the same diverse custom sounds as the V-2, developed based on our experience with the V-1.

■ Power Supply
Uses a DC9V adapter (center negative, sold separately).
Power consumption varies depending on the intensity setting. With the Intensity pot set to approximately 1 o'clock, the average current draw is approximately 130mA. The maximum peak current is 165mA when the pedal is starting.
The pedal will not function properly if the voltage at the DC connector is lower than 8.91V. The maximum recommended continuous voltage for the DC power input is 16V.
The maximum allowable short-term voltage is 25V. Using higher voltages within the recommended range (up to 16V), the Vibe Machine V-3 will generate more heat; this is normal. The different voltages do not affect the pedal's tone or headroom.
The Vibe Machine V-3 features internal protection against reverse power polarity and electrostatic discharge. The V-3 pedal also has a built-in power check function.
For details, please refer to the option manual.

■Technical Specifications
Input Impedance (ORIGNAL): 69kΩ/1kHz
Input Impedance (BRIGHT): 1MkΩ/1kHz
Input Impedance (CUSTOM): Adjustable from 69kΩ to 320kΩ/1kHz (side CUSTOM trimmer)
Output Impedance: 1kΩ - 90kΩ/1kHz (GRIT trimmer)