Meris / Enzo X

A modular instrument synthesizer with the functionality of traditional analog and digital synths

The Enzo X is a pedal-type polyphonic synthesizer that significantly expands on the functionality of the original Enzo.
Boasting the highest quality pedal-format synthesizer, it offers high functionality and flexibility, eliminating the need for dedicated guitar pickups.
Five synth modes, including a six-voice polyphonic synthesizer, allow you to freely combine modules such as ambience, modulation, filter, and drive to create your own original effects.
Furthermore, its extensive functionality is clearly displayed and controlled using a simple, easy-to-use UI developed specifically for the LVX.

Key Features
- Modular instrument synthesizer architecture.
- Five synthesizer modes, including mono, polyphonic, and dry processing.
- Polyphonic pitch detection, no special pickups required.
- Playable via instrument input or MIDI keyboard.
- Six fully polyphonic voices can be used simultaneously.
- ADSR envelope generator (supports both amp and filter)
- Configurable oscillator and filter types.
- Saw, Triangle, and Square waveforms selectable for each oscillator (with cross-modulation function)
- Intuitive user interface, also used in LVX and MercuryX (color LCD)
- Hold Modifier (envelope control) switch for enhanced expressiveness.
- 33 banks, 99 presets.
- Favorite preset bank for instant access to three favorite presets.
- Tuner with selectable reference and output modes.
- Deep Modifier section allows control signals to be routed to processing parameters.
- Newly developed flanger and phaser functions by Meris.
- Digitally controlled analog mix bus.
- Independent jacks for stereo input and stereo output.
- Switchable input and output headroom levels for Instrument or Synthesizer/Line levels.
- MIDI input and output (standard MIDI Din jack)
- Expression pedal control with simultaneous assignment of multiple parameters.
- Independent expression pedal jack.
- Continuous parameter control via MIDI.
- Send and receive presets via MIDI.
- MIDI clock synchronization.
- High-performance ARM processor.
- Highest quality analog signal and 24-bit AD/DA (with 32-bit floating DSP).
- JFET-equipped analog input section.
- Adjustable screen and logo illumination brightness.
- Glossy, luxurious surface finish.
Designed and manufactured in California, U.S.A.

■SPECS
A/D & D/A: 24-bit
DSP: 32-bit floating point
Sampling rate: 48,000 Hz
Input impedance: 1 Meg Ohm
SNR: 115 dB Typical
Frequency response: 20 Hz - 20 kHz
Maximum input level: +9 dBu (instrument level), +12.5 dBu (line/synth level)
Power supply: 9V DC, center negative, 300 mA, 2.1 mm jack
(Power supply sold separately)
Bypass: True relay bypass / Analog buffered (switchable)
Dimensions: W 18.5 × D 11.5 × H 5 cm
Weight: 680 g
USB port is for firmware updates only