CLASSIC PRO / CWE802LH

CWE800 series, dual channel receiver and 2 belt packs + lavalier microphone, headset microphone dual set. Ideal for speeches, seminars and presentations. Easy setup by simply matching the receiver and transmitter channels. Up to 2 sets can be used in the same area.

■Specifications
・Bandwidth: 800MHz
・Number of receiving channels: 2ch
・Number of channels that can be used simultaneously: 4
・Antenna method: Diversity
・Antenna: Fixed
・Audio output connector: Phone, XLR
・Reaching distance: Approximately 90m (Note: The reach of radio waves varies depending on radio wave conditions, the presence or absence of reflection or interference, and the transmission output)
・Power supply: Receiver: DC12V (supplied by the included adapter), Hand microphone: DC3V (2 x 1.5V AA batteries)
・Dimensions (WHD): Receiver: 262 x 42 x 102mm, Beltpack transmitter: 65 x 97 x 25mm
・Accessories: Power adapter (cable length approximately 180cm), 2 x cables (phone-phone)

■Features
・Select 2 channels to use from the 8 channels in the B band. Up to 2 sets (4 waves) can be used in the same area.
・Maximum reach: Approximately 90m (Note: The reach of radio waves varies depending on radio wave conditions, the presence or absence of reflection or interference, and transmission output)

・Easy setup by simply matching the receiver and transmitter channels with a button.

・Each microphone comes with a windscreen. The lavalier microphone also comes with a tie pin clip.

・The transmitter is equipped with a MUTE switch and GAIN switch.

◆Receiver CWE802R
Receiving frequency: Any 8ch from UHF806.125 to 809.750MHz
Transmission method: PLL frequency synthesizer
S/N ratio: >100dB
Spurious response: 70dB (minimum)
Receiving sensitivity: 52dB
AF response: 50Hz-18kHz
T.H.D: <1% (at 1kHz)
Dynamic range: >100dB
Tone signal: 32.768kHz
Audio output: Balanced XLR, unbalanced phone
Power supply: DC12V, current consumption: 520±10mA
◆Beltpack transmitter (CWE800T x 2 units)
Transmission frequency: B band
Oscillation method: PLL synthesizer
RF output: 10mW (maximum)
Frequency stability: ±0.005%
Gain switching: 0dB, -10dB, -20dB (3 levels)
Tone frequency: 32.768kHz
Spurious radiation: >60dB
Battery: DC3V (2 x 1.5V AA batteries), current consumption: 120±10mA

◆CWE4L
Type: Unidirectional condenser microphone
Sensitivity: -47 ± 3dB
Frequency response: 100 - 20,000Hz
Signal-to-noise ratio: 60dB
Connector: 3.5mm screw plug
Dimensions: 12φx37mm, cable length 1,570mm, clip attachment diameter approx. 5.9mm
Accessories: Windscreen, tie pin clip

◆CWE7H
Headset microphone for CWE800 series
Type: Unidirectional condenser microphone
Sensitivity: -67 ± 3dB
Frequency response: 100 - 16,000Hz
Signal-to-noise ratio: 60dB
Connector: 3.5mm screw plug
Accessories: Windscreen, adjustable band
Cable length: 135cm (from ear frame to connector base)